Theme : Nano-composites Technical Session



Download 359.34 Kb.
Page1/5
Date conversion05.02.2017
Size359.34 Kb.
  1   2   3   4   5
Day # 1 - Technical Session

Programme Schedule
Subject : Polymer Science & Technology

Theme : Nano-composites

Technical Session: TS# 1

Date: 26th May 2016 Time: 4.15 pm – 6.15 pm Venue: Seminar Hall


INV 1

Effects of carbon nanotubes on the flame retardancy of intumescent flame-retarded nylon 6

Chang Lu, Dian yang, Xinhui Huang, Jinjin Yang, Jie Sun, Shaoqing Xu and Yuqing Zhang

Key Lab of Polymer Science and Nanotechnology, Chemical Engineering & Pharmaceutics School, Henan University of Sci. and Tech., Luoyang 471003, China, luchang139@126.com


INV 2

TiO2 nanoparticle incorporated polymer nanocomposite films for food packaging applications

Johnsy George and S. N. Sabapathy

Food Engineering and Packaging Division, Defence Food Research laboratory, Siddarthanagar, Mysore-570011, Karnataka, India, g.johnsy@gmail.com


OPS 1

Thermal, mechanical and morphological properties of vegetable oil based polyurethane/ epoxy nanocomposites

Aiswarea Mathew, Smita Mohanty and Sanjay K Nayak

Central Institute of Plastics Engineering and Technology (CIPET), TVK Industrial Estate, Guindy, Chennai-600032, T.N., India, aiswarea@ gmail.com


OPS 2

Influence of Different types of layered double hydroxides (LDH) on the physical characteristics of polypropylene/LDH nanocomposites

Baku Nagendra, Sijla Rosely C.V and E. Bhoje Gowda

Materials Science & Technology Division, CSIR-National Institute for Interdisciplinary Science and Technology (CSIR-NIIST) Trivandrum, Kerala– 695019, India, bakunagendra@gmail.com


OPS 3

Poly (vinyl alcohol)/Sodium Zincate Nano composite films as multifunctional Luminescent Down – Shifting layers (LDS): A straight forward stratagem to extend the short-wavelength limit of solar cells through enhanced UV-Light harvesting

Nithin Kundachira Subramani, K.N. Shilpa, S. Sachhidananda and Siddaramaiah

Postgraduate Department of Chemistry, JSS College, Mysuru - 570 025, Karnataka, India


OPS 4

Investigation of Structural, mechanical and electrical properties of Novel hydroxy propyl methyl cellulose-CuO nanocomposite films

K. Vijayashree, K. Sheshappa Rai and T. Demappa



1Post graduate Department of Studies and Research in Polymer Science, University of Mysuru,

Sir MVPG Centre, T ubinakere, Mandya-71402, Karnataka, India, email: tdemappa2003@yahoo.co.in



OPS 5

Investigations on mechanical behavior of areca leaf-carbon nanotube reinforced hybrid epoxy composites

M.M. Sujay, H.R. Shivakumar, M. Sunil Kumar, S.G. Gopalakrishna.

Centre for Multidisciplinary Research in Advanced Materials & Tech., KVG College of Eng., Sullia, DK


OPS 6

Effect of Micro and nano fillers on Polarization and depolarization Currents in Fiber-Reinforced Epoxy Nanocomposites

M. Suchitra and N. M. Renukappa.

Department of Electronics and Communication Engg., Sri Jayachamarajendra College of Engineering, Mysore – 570 006, India, renunijagal@gmail.com




Subject : Polymer Science & Technology

Theme : Material Science/ Smart polymers

Technical Session : TS# 2

Date: 26th May 2016 Time: 4.15 pm – 6.15 pm Venue: Room No.4


INV 3

Development of biodegradable films from marine ingredients incorporated with natural anti-microbiological agents and its application as packaging material for extension shelf life of pangasius fish fillet

Rajeshwar S. Matche

Food Packaging Tech., CSIR- Central Food Technological Research Institute,  Mysore 570020


INV 4

Mechanical and Barrier Properties of Hydroxy Propyl Methyl Cellulose (HPMC) Edible Polymer Films with Plasticizer Combinations

Mahadevaiah, L.R. Shivakumara and T. Demappa

Dept of Polymer Science; University of Mysore, Sir M.V.P.G. Center, Tubinakere, Mandya-571402, Karnataka, India, tdemappa2003@yahoo.co.in


OPS 53

Molecular, Crystalline and Lamellar Length-scale Changes in the Poly(ʟ-lactide) (PLLA) during Cyclopentanone (CPO) Desorption in PLLA/CPO Co-crystals

P. Shaiju and E. Bhoje Gowda.

Materials Science and Technology Division, CSIR-National Institute for Interdisciplinary Science and Technology, Trivandrum 695 019, Kerala, India, bhojegowd@niist.res.in


OPS 54

Microwave Assisted Synthesis of Diallyldimethylammonium Chloride Grafted Locust Bean Gum: Swelling and Dye Adsorption Studies

Sirajo Abubakar Zauro and B. Vishalakshi

2Department of Post-Graduate Studies and Research in Chemistry, Mangalore University, Mangalagangothri- 574 199 (DK), Karanataka, India, vishalakshi2009@yahoo.com


OPS 55

Thermal Analysis of Composite Conduits

H.V. Gautham, K. Manjunath and T. Rangaswamy.

Department of Mechanical Engineering, Government Engineering College, Hassan, Karnataka, India

hassanmanju@gmail.com, ranga.hassan@gmail.com


OPS 56

Graphene oxide as effective filler in enhancing the pervaporation performance

D.P. Suhas, T.M. Aminabhavi and A.V. Raghu.

Dept. of Chemistry, St. Joseph’s College, Langford Road, Bengaluru, suhasdp.hsd@gmail.com


OPS 57

Photocatalytic Degradation of Indigo Carmine Under Solar/UV Irradiance Using Hydrothermally Developed Lithium Zincate Nano Powders

Nithin Kundachira Subramani, S. Sachhidananda, B.K. Kendaganna swamy, Shilpa, K.N.

Postgraduate Department of Chemistry, JSS College, Mysuru - 570 025, Karnataka, India


OPS 58

Fabrication of room temperature formaldehyde sensor using PANI-MnO2 composite pellets and films

Varun Gupta and R. Suresh

Dept. of Chemical Engg., R.V. College of Engg., Bengaluru -560059, vg.guptavarun@gmail.com


OPS 96

Mechanical and thermal luorides of glass fiber reinforced nylon 6/arylonitrile butadiene styrene composites for automobile applications

M.R. Shankre Gowda1, B.S. Madhukar1, S. Srinivas2 and Siddaramaiah1*



1Department of Polymer Science and Technology, Sri Jayachamarajendra College of Engineering, Mysore – 570 006, India

2Brakes India Limited, Sundaram Polymers Division, Nanjanagudu – 571 302, India


Day # 2 - Technical Session

Programme Schedule
Subject : Polymer Science & Technology

Theme : Nano-composites

Technical Session: TS#3

Date: 27th May 2016 Time: 11.45 pm – 1.45 pm Venue: Room No.1


INV 5

Polysaccharide Based Nanocomposite Hydrogels: Agricultural and Industrial Applications

Gangadhara B., Arun Krishna K., and Vishalakshi, B.

Department of Post-Graduate Studies & Research in Chemistry,

Mangalore University, Mangalagangothri-574199 (DK), Karnataka, vishalakshi2009@yahoo.com



INV 6

Antibacterial properties of silver-polycarbonate nanocomposite synthesised by gamma radiation-assisted diffusion method

P. Ramya, K. Hareesh, A.V.Deore, S. Samarin, J. F. Williams, G. Sanjeev, N.A. Dhole, K. M. Kodam, V. N. Bhoraskar, S. D. Dhole

ARC Centre for Antimatter-Matter Studies, School of Physics, University of Western Australia, Crawley, WA 6009, Australia


OPS 7

Separation of isopropanol/water mixtures by Nanocomposite SA-GL membranes: Membrane synthesis, Characterization and Pervaporation performance

Y. Maruthi, K. Chowdoji Rao, M.C.S. Subha

Department of Polymer Science & Tech, Sri Krishnadevaraya University, Anantapuramu, A.P., India


OPS 8

Removal of heavy metals from water using polymer/ metal oxide based nanocomposites

Charulatha M.S, M. A. Lourdu Antony Raj and A. R. Phani.

Department of Chemical Engg., RV College of Engineering, Bengaluru 560059, Karnataka, India


OPS 9

Preparation of Citric Acid-Based Nano Hydroxyapatite Composite Graft

Priya Chaurasia and P.C. Deepika

Department of Periodontology, JSS Dental College and Hospital, JSS University, Mysuru, Karnataka, India, smilealot19@yahoo.in


OPS 10

Preparation and characterization of novel PMMA/PA12 composites reinforced with pure and functionalized single walled carbon nanotubes

N.Mohan Babu, D.Suresh Kumar, N.Bikshamaiah, S.Ramesh and K.Madhukar



1Department of Physics, South Campus, Telangana University, Biknur.

2Department of Physics, University PG College, Sathavahana University, Godavarikhani.

Department of Physics, Mahatma Gandhi University, Nalgonda.



4Department of Physics, Osmania University, Hyderabad, Telangana, mkatakam@osmania.ac.in,

OPS 11

A Novel Greener Approach for the Fabrication of Polyethylene-g-Starch Nanoparticle Biocomposites

Sheeja, Manaf O, Juraij K, Sujith A

Material Research Laboratory, Department of Chemistry, NITC, Calicut, Kerala, India

sheeja_p100023cy@nitc.ac.in


OPS 12

Fabrication and Properties of Thermoplastic Starch based Green Nanocomposites Reinforced with Graphene Oxide

D. Suresh Kumar, N. Bikshamaiah, N. Mohan Babu, S.Ramesh and K. Madhukar

Department of Physics,University PG College, Sathavahana University, Godavarikhani.

mkatakam@osmania.ac.in, mkatakam28@gmail.com


OPS 13

Synthesis and Characterisation of Graphene Oxide and their Chitosan Based Biocomposites

Shyamili K.S., Shetty Ravindra Rama and S.K.Rai

Polymer Composites Laboratory, Department of Polymer Science, Sir M.V.P.G. Centre, University of Mysore, Mandya-571 402, Karnataka, India, shettyravindrarama@gmail.com



Subject : Polymer Science & Technology

Theme : Polymer Blends

Technical Session: TS#4

Date: 27th May 2016 Time: 11.45 am – 1.45 pm Venue: Room No.4








INV 7

Development of PPE/PS blends with special Extruder and process design

Prakash Hadimani, H.N Narasimha Murthy, Rajalakshmi Mudbidre, Pradeep Bakshi

STEER, Peenya Industrial Area, Bangalore -560058, Karnataka, India


INV 8

Cellulose microfibers blended in silk fibroin for bone implants (w)

Priya Dasan, K

Department of Chemistry, Material Chemistry Division, SAS, VIT University, Vellore, TN, India,

Ph No.: +91 416 2202696, priyajeenetd@gmail.com


INV 9

Is Pervaporation a vital separation process?

Soney C George and Thomasukutty Jose

Centre For Nano Science and Technology, Department of Basic Sciences, Amal Jyothi College of Engineering, Kanjirapally-686518, soneygeo@gmail.com, thomasukutty88@gmail.com


OPS 16

Erosion behavior of polyoxy methylene/polytetrafluroethylene blend composites: Effect of short glass fiber and ceramic fillers

Krishna and B. Suresha

Department of Mechanical Engineering, Vidyavardhaka Polytechnic, Mysuru-570002, India

sureshab@nie.ac.in, sureshab2004@yahoo.co.in


OPS 35

Exploring the role of epoxidized soybean oil towards improving the mechanical and thermal properties of poly(lactic acid)/ thermoplastic starch blends

Sukhila Krishnan, Priyanka Pandey, Smita Mohanty and Sanjay K.Nayak

Laboratory for Advanced Research in Polymeric Materials (LARPM),

Central Institute of Plastic Engineering and Tech., Bhubaneswar, Odisha, sukhilaajith@gmail.com



OPS 36

Effect of rubber based compatibilizer on mechanical and thermal properties of PMMA/PVC blends

Sunil S Suresh, Smita Mohanty and S. K Nayak

Laboratory for Advanced Research in Polymeric Materials, CIPET, Bhubaneswar, Odisha, India

sunilssuresh@gmail.com


OPS 37

Novel Polymer Blends Crosslinked via Electron Beam Irradiation for Cable Sheathing Application

Joyeeta Dutta and Kinsuk Naskar

Rubber Technology Centre, Indian Institute of Technology, Kharagpur, India- 721302.

joyeechem@gmail.com


OPS 38

Miscibility Studies of Hydroxy Propyl Methyl Cellulose/poly (ethylene glycol) blends in water by viscosity, density, Refractive index and ultrasonic velocity methods

Hadadi Yallappa, J.Srinivasa, J.Sannappa and T. Demappa.

Dept. of Physics, SJVP College Autonomous, Harihara, Davanagere, tdemappa2003@yahoo.co.in


OPS 39

Structural and electrical studies on PVA/PVP blends filled with zinc oxide-cerium oxide nanoparticles

H.N.Chandrakala, Rajeshwari, D.U, Shivakumaraiah and Siddaramaiah

Department of Chemistry, Kalpataru Institute of Technology, Tiptur-572202, Karnataka, India


OPS 40

An insight into the blends of synthetic peptides with other polymers -A review

Mahesh B, Nanjundaswamy G S, Channe Gowda D and Siddaramaiah

J.S.S Academy of Technical Education, Dr Vishnuvardhan Road, Bengaluru – 560 060

DOS in Chemistry, University of Mysore, Mysuru-570 006

Department of Polym. Sci. and Tech., Sri Jayachamarajendra College of Engg., Mysuru- 06

maheshb22@gmail.com



Subject : Polymer Science & Technology

Theme : Bio and green composites

Technical Session: TS#5

Date: 27th May 2016 Time: 2.30 pm – 4.30 pm Venue: Room No.1


INV 10

Non-edible seed cake as fillers for bio-composite preparations

M. Veerabhadra Swamy

Dept. of Science & Humanities, P E S University, BSK III Stage, Bangalore, India, vbs@pes.edu


INV 11

An Investigation on the Effect of Silica Aerogel Content on thermal and Mechanical Properties of Sisal/PLA Composites.

C. Venkata Prasad and D. Gnanasekaran

Dielectric Materials Division, Central Power Research Institute, India, drchavidi@cpri.in


OPS 23

An efficient approach towards development of Hazard-Free Green Elastomeric Composites.

Partheban.M and Kinsuk Naskar.

Rubber Technology Centre, IIT-Kharagpur, Kharagpur-721302, West Bengal, parthevlr@gmail.com


OPS 24

Tensile and fire retardant properties of chitosan and APP encapsulated flax fabric/ thermoplastic starch green composites.

M. N. Prabhakar, Atta ur Rehaman Shah and Jung-Il Song.

School of Mechatronics, Changwon National University, Changwon, South Korea– 641 773.

jisong@changwon.ac.kr


OPS 25

Waste silk fiber reinforced polymer matrix composites: A review.

S.M. Darshan and B. Suresha2* and G.S. Divya

Department of Mechanical Engineering, Christ University, Bengaluru - 560029, India, sureshab2004@yahoo.co.in


OPS 26

Fabrication and characterization of natural fiber reinforced epoxy composites.

Dhiresh Bajpai, Ekansh Singh, Avinash Barti, Entjar Hussain T, Mamatha,T.G., and A.N. Veerendra Kumar.

Department of Mechanical Engineering, JSS Academy of Technical Education, Noida, UP, India


OPS 27

Recent developments of natural fiber reinforced thermoset polymer composites and their mechanical properties.

Divya G.S, S.M. Darshan and B. Suresha

Department of Automobile Engg, Dayanada Sagar College of Engineering, Bengaluru-560078, India,

sureshab2004@yahoo.co.in


OPS 28

Effectiveness of Areca (Betel) Fiber as a Reinforcing Material in Eco-Friendly Composites - A Review

Raghuveer H. Desai; L. Krishna murthy and T.N. Shridhar.

Lighting CoE, Honeywell Tech., Solutions Pvt. Ltd., Bangalore, raghuveer.desai@honeywell.com


OPS 29

A study on the effect of acidic, basic and polymeric surface treatment on mechanical properties of Abaca/Vinyl ester composite

Syed Nabeel Ahmed, M.N. Prabhakar, Atta Ur Rehman Shah, Zhang wei, Jung IL Song

Department of Mechanical Engineering, Changwon National University, Changwon, Korea,

jisong@changwon.ac.kr



Subject : Polymer Science & Technology

Theme : Polymer Synthesis

Technical Session: TS#6

Date: 27th May 2016 Time: 2.30 pm – 4.30 pm Venue: Room No. 2


INV 12

Synthesis of multi-responsive hyperbranched poly(amido amine)s via Michael-addition reactions for potential gene delivery

Zhiqiang Yu*, Xiao Wang, Dahu Yao and Yuqing Zhang

Chemical Engineering And Pharmaceutical Department, Henan University of Sci. and Tech., Luoyang, 471023, Henan, China, zqyuhaust@163.com


INV 13

Kinetics of Radical Chain Polymerization

M.P. Yashoda

Dept. of Chemistry, Manipal Institute of Technology, Manipal, India, mpyashoda12@rediffmail.com


OPS 71

Preparation and optimization of biobased epoxy from epoxidized vegetable oil

Sudha G S, Hemo jyoti Kalita, Smita Mohanty & Sanjay Kumar Nayak

Central Institute of Plastics Engineering and Technology (CIPET), Chennai, India

sudhasuma@gmail.com


OPS 72

Process of making Copolymers from Quaternary Ammonium Itachonic Di-Esters and Methyl methacrylate against Superbugs

G. J. Dominic, M. P. Yashoda, S. Prasannakumar

Department of Chemistry, Manipal Institute of Technology, Manipal University, India


OPS 73

A Comparative Study on the Synthesis, Characterization and Antimicrobial Properties of Complexes of Poly (vinyl pyrrolidone) with Co(II), Ni(II) and Cu(II)

M.K. Veeraiah, Anasuya K.V., Hemalatha, P, Anupama, C and Mousumi Das

Department of Chemistry, Sri Siddhartha Institute of Technology, Tumkur, Karnataka, INDIA,

veeraiahmk@gmail.com, phlssit@gmail.com


OPS 74

Novel Method for Manufacturing of PF Resole Through A Continuous Process

Abdul Habid, P, Lity Alen Varghese, Mohandas and G. Unnikrishnan

Department of Chemical Engineering, NIT Kozhikode, Kerala, India


OPS 75

Facile Synthesis and Fine Tuning of Optical Properties of Tertiary Amine based 1,3,4- Oxadiazole Containing π- Conjugated Polymer

Nimisha Kaippamangalath, and G. Unnikrishnan

Polymer Science and Technology Laboratory, National Institute of Technology, Calicut- 673601, Kerala, India, nimisha.24387@gmail.com, unnig@nitc.ac.in


OPS 76

Coil-coil type di-block copolymers: Synthesis, characterization and their optical and electronic properties

J. Gopinath, M. Aravind, and A. V. Sesha Sainath

Polymers and Functional Materials Division, CSIR-Indian Institute of Chemical Technology, Hyderabad -500 007, Telangana, India, gopinath.jonnalagadda2@gmail.com



Subject : Polymer Science & Technology

Theme : Advanced polymer composites

Technical Session: TS#7

Date: 27th May 2016 Time: 2.30 pm – 4.30 pm Venue: Room No.4


INV 14

Agricultural applications of polymers

K. Chowdoji Rao

Department of Polymer Science & Technology, S. K. University, Ananthapuramu – 515 003, A.P.


INV 15

A process for zinc coatings on semi-rigid packaging by wire spray

A.Ramakrishna and C.S. Ramesh

Defence Food Research Laboratory, DRDO, Mysuru, Karnataka, India


OPS 14

Analysis of delamination in carbon fibre reinforced polymer composite using finite element method

Shahabaz, S.M, Nagaraj Shetty, Sharma S.S



*Dept. of Mech. Engg., Manipal University Jaipur, Jaipur

OPS 15

Structure-Property Relationship in CoCl2 Doped Hydroxy Propyl Methyl Cellulose Composites

Thejas Urs G, Gowtham G K, Y. Sangappa, H Somashekarappa & R Somashekar

Center for Materials Science, University of Mysore, Vijnana Bhavan, Mysore – 570006, rs@physics.uni-mysore.ac.in


OPS 17

Structural Health Monitoring of Epoxy/E-Glass fibre Conduits

A.P. Pavan Kumar, K.R. Channakeshava, T. Rangaswamy and K. Manjunath

Department of Mechanical Engineering, Government Engineering College, Hassan, Karnataka, India

pavankumarapjain@gmail.com, ranga.hassan@gmail.com


OPS 18

Enhancement of mechanical properties and wear resistance of epoxy: glass fiber, basalt fiber, PTFE and graphite

B.S. Kanthraju and B. Suresha

Department of Mechanical Engg,, Don Bosco Institute of Tech., Bengaluru, sureshab@nie.ac.in


OPS 19

Analysis on Mechanical and Dynamic behavior of Granite Epoxy Composites with Cast Iron Particulates as Filler

S.S. Balakrishna, H Girish, G C Mohan Kumar and S. Narendranath,

Dept. of Mechanical Engineering, Sahyadri College of Engineering, Mangalore - 575007, India

Dept. of Mechanical Engineering, NITK, Surathkal, balakrishna.mech@sahyadri.edu.in



OPS 21

Bagasse Fiber/Functionalized Polyethylene Composites by Palsule Process Density, Void Content and Thermal Properties

Akshay Khevariya, Kishor Biswas, Dinesh, Atul Maurya, Prathmesh Garg and Sanjay Palsule

Department of Polymer & Process Engineering, Indian Institute of Technology Roorkee

DPP IIT-R SRE Campus Paper Mill Road Saharanpur – 247 001, India



macrofpt@gmail.com, macrofpt@iitr.ac.in

OPS 22

Mechanical, Microstuructural and PALS studies: PU/curcumin green composites

B.S. Madhukar, T. Sagar, P. Ramya, D.G.Badregowda, V. Annadurai, T.V.M.G. Sasikala and Siddaramaiah

Department of Polymer & Technology, Sri Jayachamarajendra College of Engineering, Mysuru, Karnataka, India, madhukarbs007@gmail.com



Subject : Polymer Science & Technology

Theme : Polymers for electrical and electronic application

Technical Session: TS#8

Date: 27th May 2016 Time: 2.30 pm – 4.30 pm Venue: Room No.5


INV 16

Green Chemistry Towards Sustainable Development

Sumanda Bandyopadhyay

SABIC Research and Technology Pvt. Ltd., Bengaluru, India, Sumanda.Bandyopadhyay@sabic.com


INV 17

Microwave assisted processing of polymer matrix composites - A rapid and energy-efficient alternative

Sandhya Rao

Centre for Societal Missions & Special Technologies, CSIR-NAL, Bengaluru, Karnataka, India


OPS 77

Structure - Property Relationship in Ethylene Octene Copolymer (EOC) - Polydimethyl Siloxane (PDMS) based TPEs for cable insulation applications

Padmanabhan R, Kinsuk Naskar, and Golok B Nando

Rubber Technology Centre, Indian Institute of Technology, Kharagpur, West Bengal, 721302, India

padmanabhan@rtc.iitkgp.ernet.in


OPS 78

Blue Luminescent Polycarbonate/Halloysite Nanotube Films a Promising Material for Dielectrics

G. Santhosh, B.S. Madhukar, G.P. Nayaka and Siddaramaiah

Department of Mechanical Engineering, NMAMIT, Nitte - 574110, India


OPS 79

Effect of Lithium Chloride Content on Spectral, Electrical and Microstructural Behaviors of Polyvinyl alcohol Composites

Gayitri, H.M, Gnanaprakash, A.P, Madhukar B.S, Hemarju B.C and Siddaramaiah

Department of Electronics and Communication Engg., Sri Jayachamarajendra College of Engg., Mysore–570 006, gnanaprakash@physics.uni-mysore.ac.in


OPS 80

Copper doped Zirconia nano fillers functionalized PVA dielectric films as Highly Flexible Visible band pass filters for Opto-electronic applications

Nithin Kundachira Subramani, Sachhidananda, S., Chiranjeevi, K., Ranjith, M.S. and Siddaramaiah

Department of Polymer Science and Tech., Sri Jayachamarajendra College of Engineering, Mysuru


OPS 81

Effect of detection of dopamine on the reinforcement of carbon nanotubes in epoxy at carbon past modified electrode

H. Vidya and B.E. Kumara Swamy

Department of PG Studies and Research in Industrial Chemistry, Kuvempu University, Jnana Sahyadri, Shankaraghatta-577451, Shimoga, Karnataka, India


OPS 82

Dielectric Behaviors of Reversibly Stretchable Sodium Doped manganese dioxide fabricated poly (vinyl alcohol) Nano Composites for Super Capacitor Applications

Champa,T, Nithin Kundachira Subramani, Sachhidananda, S. and Siddaramaiah

Department of Polymer Science and Technology, Sri Jayachamarajendra College of Engineering, Mysuru - 570 006, Karnataka, India



Subject : Polymer Science & Technology

Theme : Polymeric Hydrogels and Drug Delivery

Technical Session: TS#9

Date: 27th May 2016 Time: 4.30 pm – 6.15 pm Venue: Seminar Hall


INV 18

. Multi Responsive Interpenetrating Polymeric Network Hydrogels for Controlled Release of Chemotherapeutic Agents

K.S.V. Krishna Rao

Polymer Biomaterial Design and Synthesis Laboratory, Department of Chemistry, Yogi Vemana University, Kadapa- 516003, A.P., ksvkr@yogivemanauniversity.ac.in, drksvkrishna@yahoo.com


INV 19

Effect of Radiation on Polymer Blends and Their Drug Release Behavior

H.R. Shivakumar

Centre for Multidisciplinary Research in Advanced Materials and Technology,

Department of Chemistry, KVG College of Engineering Sullia, shivakumar17@hotmail.com



OPS 41

Polyelectrolyte hydrogels based on 2-Acrylamido-2-methyl-1-propane sulfonic acid (AMPS); Synthesis and characterization

K.M. Mahadevaswamy and Siddaramaiah

Hollingsworth & Vose Advanced Materials India Private Limited, Mysore, Karnataka, India


OPS 42

Synthesis and Swelling behavior of sodium alginate / poly (vinyl alcohol ) PVA hydrogels

Shivakumara L.R and T. Demappa

Department of Post graduate Studies and Research in Polymer Science, University of Mysore, SirM.V.P.G. Centre, Tubinakere, Mandya, Karnataka, India, tdemappa2003@yahoo.co.in


OPS 43

Design and Evaluation of Gelatin/poly (Acrylamide-co-Sodium Methacrylate) semi IPN hydrogels for the controlled release of relaxesene hydrochloride

S.K. Sindhu, D.V. Gowda and Siddaramaiah

Department of Chemistry, Vidya Vikas Institute of Engineering and Technology, Mysuru - 570

028, Karnataka, India, siddaramaiah@gmail.com



OPS 44

Synthesis and characterization of Poly(N,N’- diethyl acrylamide) macro-hydrogels for drug delivery application

Sushma I Havanur and P.E. Jagadeesh Babu

Department of Chemical Engineering, National Institute of Karnataka, Surathkal – 575025, Karnataka, India, sushmaih.1987@gmail.com


OPS 45

Development and Characterization of Poly(Lactide-Co-Glycolide) Based Nanoparticles Loaded with Flutamide, an Anticancer Drug for Controlled Drug Delivery

P. Kumara Babu, M.C.S.Subha and K. Chowdoji Rao

Department of Polymer Science & Tech., Sri Krishnadevaraya University, Anantapuramu, AP, India


OPS 46

Development of Poly(N-vinylcaprolactam) Based Stimuli Responsive Semi-IPN Hydrogels for Controlled Release of 5-Flurouracil

N. Sivagangi Reddy and K.S.V. Krishna Rao

Polymer Biomaterial Design and Synthesis Laboratory, Department of Chemistry, Yogi Vemana University, Kadapa. Andhra Pradesh, India. ksvkr@yogivemanauniversity.ac.in




Subject : Polymer Science & Technology

Theme : Bio and green composites

Technical Session: TS#10

Date: 27th May 2016 Time: 4.30 pm – 6.15 pm Venue: Room No. 1


INV 20

Development of Biodegradable polymers for pollution free environment

M.C.S. Subha

Department of Chemistry, Sri Krishnadevaraya University, Ananthapuram -515 003


INV 21

Processed Marine Corals Reinforced Polymer Bio-Composites

G.C. Mohan Kumar and P. Kamalbabu

Department of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal - 575025, Mangalore, mkumargc@gmail.com


INV 22

Drug encapsulated Biodegradable Nanomaterials to treat Inflammation

Guru Bharath Raja, Anusha Prabhu and Madiha Ahamad

Department of Biotechnology, Manipal Institute of Technology, Manipal University, India

Email- bharath.guru@manipal.edu



OPS 20

Coconut Fiber / Functionalized Polyethylene Composites by Palsule Process Density, Void Content and Thermal Properties

Rahul Kumar, Kishor Biswas, Dinesh Atul Maurya, Madhubala and Sanjay Palsule

Department of Polymer & Process Engineering, Indian Institute of Technology Roorkee

DPP IIT-R SRE Campus Paper Mill Road Saharanpur, India



macrofpt@gmail.com, macrofpt@iitr.ac.in

OPS 30

Effect of fiber orientation on the mechanical properties of uni-directional flax fiber/vinyl ester composite

Zhang wei, M.N. Prabhakar, Syed Nabeel Ahmed, Atta ur Rehman Shah, and Jung il Song

Department of Mechanical Engineering, Changwon National University, Changwon, Korea.

jisong@changwon.ac.kr


OPS 31

Abaca-fabric/Vinyl ester composites:Fire retardants on the flammability, thermal stability, and mechanical properties

Zhenhua Li, Atta ur Rehman Shah, M. N. Prabhakar, and Jung-il Song

Department of Mechanical Engineering, Changwon National University, Changwon, Korea

jisong@changwon.ac.kr


OPS 32

Mechanical property evaluation of Sugar Cane Trash –Kevlar Pulp filler reinforced Epoxy base Hybrid Polymer Composites

A.N. Veerendra Kumar and N. D. Jawali

Department of Mechanical Engineering, J S S Academy of Technical Education Noida.


OPS 33

Preparation and Mechanical Characterization of Areca Bast Fiber Reinforced Epoxy Composites

M. Sunil Kumar S.G.Gopalakrishna and H.R. Shivakumar

Dept. of Mechanical Engineering And Research Centre, KVG. College of Engineering, Sullia, D.K, Karnataka, India, sunil_pdm@rediffmail.com


OPS 34

Abrasive Wear and Machinability Characterization of Coconut Shell Particle Reinforced Epoxy Green Composites

G. H. Manjunatha Chary and K Sabeel Ahmed

Department of Mechanical Engineering, Jawaharlal Nehru National College of Engineering, Shivamogga – 577204, Karnataka, India, manju_gh2006@yahoo.co.in



Subject : Polymer Science & Technology

Theme : Material Science/ Smart polymers

Technical Session: TS#11

Date: 27th May 2016 Time: 4.30 pm – 6.15 pm Venue: Room No.3


INV 23

Super TPV: A New Generation Thermoplastic Elastomer

Kinsuk Naskar

Rubber Technology Centre, Indian Institute of Technology, Kharagpur-721302, West Bengal, India


INV 24

Poly Aryl Ether Ketone Composites for Electrical Insulation, Thermal degradation and Fire Performance Characteristics

V.V.Pattanshetti, G.M.Shashidhara, Dhorali Gnanasekaran

Central Power Research Institute, Bangalore, Karnataka, India


INV 25

Nanofibers - Propertıes and Applications

D Vishakante Gowda

Dept. of Pharmaceutics, JSS College of Pharmacy, JSS University, S.S. Nagar, Mysuru-570 015, Karnataka, India, dvgowda@jssuni.edu.in


OPS 59

Poly Caprolactone based Electrospun Nanofibers for Super hydrophobic Surface

C.R. Reshmi and A. Sujith

Materials Research Laboratory, NIT-Calicut, Calicut-673601, Kerala, reshmichem@gmail.com


OPS 60

Physicochemical evaluation of polymeric bioengineering scaffold based on Electrospun PCL/Starch-g-PCL nanofibers

P. Sagitha, C. R. Reshmi, Sheeja, and A. Sujith

Materials Research Laboratory, National Institute of Technology Calicut, Calicut


OPS 61

Antibacterial electrospun Polyvinyl pyrrolidone / Graphene Oxide nanofibrous membrane

Suja P Sundaran, C.R Reshmi, and A.Sujith

Material research laboratory, Chemistry Department, NIT Calicut, Kerala, India


OPS 62

Preparation, and characterizations piezoelectric films of Rochelle salt and polyvinylidine flouride

Manasvi H Paradkar, Baijayanti Ghosh, R Suresh, Naveen CS and A.R. Phani

Department of Chemical Engineering, R V College of Engineering, Bengaluru-560059, India

2Innovative Nano and Micro Technologies, Pvt. Ltd., Bengaluru – 560059, India



OPS 63

Pervaporation separation of water – Isopropanol Mixture using H-ZSM-5 (SAR–240) Zeolite incorporated Sodium alginate (NaAlg) Membranes

U. Sajan Kumarji Rao, K. Sreenivasulu, K. Chowdoji Rao and M.C.S.Subha

Dept.of Chemistry, Sri Krishnadevaray University, Anantapuramu -515 003, A.P, India


OPS 64

Modification, Fabrication and Characterization of Poly Lactic Acid (PLA) Scaffolds

Shebi, A., and Lisa Sreejith

Soft Material Research Lab (SMRL), Department of Chemistry, N, Calicut, India


OPS 95

Effect of powder morphology on the material properties of stainless steel 17-4PH feedstockcomposition used in Powder Injection Molding (PIM)

B. N. Mukunda*, Preethi, S., and G.S Ananthapadmanabha

1Indo-US MIM Tec Pvt. Ltd., KIADB Industrial Area, Hoskote, Bangalore 562114, India

2Department of Polymer Science & Technology, Sri Jayachamarajendra College of Engineering,

Mysore, Karnataka, India



Subject : Polymer Science & Technology

Theme : Polymers for electrical and electronic application

Technical Session: TS#12

Date: 27th May 2016 Time: 4.30 pm – 6.15 pm Venue: Room No.4


INV 26

Organic Materials for Emerging Applications: Design, Synthesis, Characterization and Device Fabrication

V. Jayathirtha rao

Crop Protection Chemicals Division & Academy of Scientific & Innovative Research (AcSIR), CSIR-Indian Institute of Chemical Technology, Uppal Road Tarnaka Hyderabad-500007


INV 33

Viscoelastic Behaviour of Polymers

G.M. Shashidhara

Department of Polymer Science & Engineering, Sri Jayachamarajendra College of Engineering,

Mysuru – 570 006, Karnataka, India,



OPS 83

Enhanced electromagnetic interference shielding of graphene incorporated polymer composites

M. Praveen, P. Sampthkumaran and B.M. Nagabhushana

M.S. Ramaiah Institute of Technology, Bangalore-560 054, bmnshan@yahoo.com


OPS 84

Structural, morphological and conductivity studies on polythiophene films for flexible electronic applications

Vigesh. P and P.L. Muralidhara, Samyuktha. G. C, Baijayanti. G, C.V.S. Naveen and A.R.Phani

Department of Chemical Engineering, R.V. College of Engineering, Bengaluru, Karnataka, India


OPS 85

Irradiation Effect on the Ionic Conductivity of Solid Polymer Electrolyte Systems

Manjunatha H, and Kumara swamy G N

Department of Physics, Amrita Vishwa Vidyapeetham, Bengaluru-560 035, India, gnk_swamy@blr.amrita.edu


OPS 86

Enhancing the structural orientation in thiophene derivative polymer through electric field and its effect on device characteristics

Khadija Kanwal Khanum, Arul K. Varman and Praveen C. R

Department of Materials Engineering, Indian Institute of Science Bangalore – 12, Karnataka, India


OPS 87

Waste plastic pyrolysis using solar energy

Pramod B Parit, Sharat R Shetty, Winson R, D’ souza, Sitara S M

Department of Mechanical Engineering, MITE, Moodabidri, Karnataka, India


OPS 88

Amino Functionalized Polymer as Charge Transport Layer for Solar Cell Application

Hemavathi, B., R. Geetha Balakrishna and T.N. Ahipa

Nanostructured Hybrid Functional Materials and Devices, Center for Nano and Material Sciences, Jain University, Jain Global Campus, Bangalore, Karnataka, India

tn.ahipa@jainuniversity.ac.in, br.geetha@jainuniversity.ac.in

  1   2   3   4   5


The database is protected by copyright ©dentisty.org 2016
send message

    Main page