Subsea clamps (Lot N3), Diving accessories and spare parts



Download 40.76 Kb.
Date11.07.2018
Size40.76 Kb.


Diving and Rescue Works Department of

State Oil Company of Azerbaijan Republic (SOCAR)

announces an open procurement competition (№ SOCAR/36003-16) in order to provide the requirement of spare parts for Cougar-XT-1431 remotely operated vehicle (Lot N1), subsea cutting rods (Lot N2), Subsea clamps (Lot N3), Diving accessories and spare parts (Lot N4)





Documents to be submitted for participation in the competition:


  • Application letter for participation in the competition;

  • Bank document on payment of the participation fee;

  • Bid.

Application for participation in the competition (signed and sealed) and the bank document on payment for participation fee should be submitted in Azerbaijani, Russian or English languages no later than 20.09.2016, 17:30 by Baku time, to the address of the Purchasing organization specified in the notice.

The copies of the required documents (except the bid) may be sent to the e-mail address of the contact person specified in the notice. In this case, the originals of the documents shall be submitted to the Purchasing Organization until the last day of submission of the bids.




The deadline for submission of the bids:


  • One original and two copies of the bid for the each Lot to be submitted to the Purchasing Organization before 27.09.2016, 10:30 a.m. by Baku time.

  • Later bids shall be rejected.




Participation fee and acquisition of theinvitation to bid:


  • Those wishing to acquire the invitation to bid for Azerbaijani or English languages can obtain it from the contact person in electronic or print form after paying

118 Azerbaijani manat ( VAT included) for Lot N1

118 Azerbaijani manat ( VAT included) for Lot N2

118 Azerbaijani manat ( VAT included) for Lot N3

118 Azerbaijani manat ( VAT included) for Lot N4


or an equivalent amount in any other freely convertible currency to the below-mentioned account, till the date specified in the paragraph I of the notice, on any business day of the week from 09:30 a.m. to 05:30 p.m.


  • Account number:

International Bank of Azerbaijan OJSC,

Account number: AZ38IBAZ38010019449306332120,

TIN: 9900003871,

Code: 805250,

Corr. account: AZ03NABZ01350100000000002944,

TIN: 9900001881,

SWIFT BIK: IBAZAZ2Х.


  • The participation fee is not refundable



Execution term of the Contract:

It is required to fulfill the conditions of the purchase contract for 90 calendar days







The address of the Purchasing organization:

AZ1023


Baku city

Sabayil district

Salyan highway 23

Administrative office of Diving and Rescue Works Department (3rd floor)



Contact person:

Eminov Emil

Chief of Material-Technical Procurement Department

Tel: +99412 521 00 00 (36017)

Fax: +99412 521 00 00 (36010)

Emil.Eminov@socar.az






The notice , information about the subject of procurement and application form to obtain tan invitation to bid are placed at the internet site:

www.socar.az (http://www.socar.az/socar/az/company/procurement-supply-chain-management/procurement-notices)





Time, place and the opening date of bids:

Bids wil be opened on 27.09.2016 at 11:00 a.m. by Baku time at the address of the Purchasing Organization specified in paragraph V of the notice.






Information about contracts awards:

For the information about the final results of the competition please click following web link:



http://www.socar.az/socar/az/company/procurement-supply-chain-management/contract-awards




(In the letter head of the applicant)

Application form for participation in the open competition and for acquisition of Invitation to Bid (Set of Basic Conditions)

___________ city “__”_______20__

___________No.

Attn.: Mr. Zaur Jafarov, Head of Procurement Group of Diving and Rescue Works Department of SOCAR

Hereby we, [full name of the applicant consignor (Contractor) is specified] confirm the intent of participation in Lot(s) (specify number of Lots) an open competition № SOCAR/36003-16 announced by Diving and Rescue Works Department of SOCAR for the procurement of different type of materials.

At the same time, we confirm the absence of any cancellation or bankruptcy procedures, activity interruption in relation to [full name of the applicant consignor (Contractor) is specified] or any situation making it’sparticipationimpossible.

We kindly ask You to send the soft copy of an invitation to bid to the following e-mail address:____________________.


The contact information for propmtly responding the queries relating the documents submitted by us and other issues:

  • Contact person: _______________________________

  • Position of the contact person: ____________________

  • Phone number: ________________________________

  • Fax: ________________________________________

  • E-mail address: ________________________________



Appendix:

  1. Original of the bank document on payment of the participation fee – __ pages.

________________________________ _______________________

(name, surname, patronymic of the responsible person) (signature of responsible person)

_________________________________



(position of responsible person)

Seal

THE LIST OF PURCHASING GOODS


Line N

Description

UOM

QTY




LOT-1 (spare parts for Cougar-XT-1431 Remotely Operated Vehicle)







1

Bulkhead connector for manipulator, code MCBH16F

piece

2

2

Bulkhead connector for manipulator, code M2ABH4M

piece

2

3

Bulkhead connector for manipulator, code M2ABH5M

piece

2

4

Spare part for manipulator "HLK2020 Continuos Jaw Rotate Actuator"

piece

2

5

Electrical power pack for manipulator 660V code HLK90130

piece

1

6

Electrical power pack for manipulator 660V code HLK90150S

piece

1

7

Pump for manipulator, code XVOR-0.45

piece

2

8

Cylinder for manipulator, code HLK-11060 25mm

piece

2

9

"Joystick" unit for control console of manipulator, code JS4, serial N623

piece

2

10

Bulkhead connector for tether management system, code M3BH12M

piece

2

11

Bulkhead connector for tether management system, code M3BH7M

piece

1

12

Clatch cylinder of tether management system

piece

2

13

Hydroacoustis spare part "Latch P05949" for tether management system

piece

1

14

Cable layer for tether management system code P05929

piece

2

15

Oil compensator for tether management system

piece

2

16

Oil filter MF 1003P10NBP01 for crane-winch system

piece

2

17

Hydraulic hose piece code 11.120mm 4948/33 1/2R2STRxSTR for LARS

piece

1

18

Cylinder code DD/CYL/COMP/000 for crane-winch system

piece

2

19

Valve for crane-winch, code HDM18

piece

1

20

Bulkhead connector for EPOD equipment, code M2BH2F

piece

2

21

Bulkhead connector for EPOD equipment, code M3BH2F

piece

2

22

4-pin cable 2000mm, c\w fittings, code M2W4F-2000 for EPOD equipment

piece

2

23

4-pin cable 2000mm, c\w fittings, code M2W4M-2000 for EPOD equipment

piece

2

24

Propeller thruster of vehicle, code SM7

piece

3

25

Bulkhead connector for SM7 thruster, code M2BH7F

piece

4

26

Bulkhead connector for subsea camera, code M2BH9F

piece

4

27

Hydraulic hose piece 20 bar c\w ss fittings

meter

15

28

Subsea tether cable for Cougar-XT-1431 ROV

meter

200

29

Connector "Kellams Grip" for securing tether to vehicle

piece

1

30

Chain tension unit for ROV vehicle

piece

5

31

Oil compensator for ROV vehicle

piece

2

32

Resistor 5hOm 1109 (for operate camera from console)

piece

5

33

Electronical board code 3426-40İSSUE3 (for console of manipulator)

piece

1

34

Fuse 1A, 250V

piece

30

35

Fuse 5A, 250V

piece

10

36

Monitor 15" (for nabigation system)

piece

1

37

"Canford" audio communication unit COM01, code 649474 (c\w headphones)

assy

1

38

Control console of vehicle "Joystick" unit HC(D)/5-D, kodu 283

piece

1

39

Potentiometer (for vertikal "Joystick") "MNT 4K7 WITH KNOB 1W", code 350-643

piece

3

40

Potentiometer (for horizontal "Joystick") 5K 1W, code 351-271

piece

6

41

Oil filter of main pump code STR0702SG1M90

piece

2

42

Sea depth sensor code 10DP/2

piece

1

43

"FAN 24V 80MM Ultraslim", code 364-2922 (for sonar prossesor)

piece

2

44

Optik cable cleanining liquid "Nitro mors"

liter

2

45

Equipment for connecting of fiber bulkheads model TL-UCP

assy

1

46

Subsea bulb code "TMS P00357-M"

piece

3




LOT-2 (subsea cutting rods)







1

Rods for subsea cutting 18” x 3/8” (for cut/melt metal and other hard materials)

kg

3000




LOT-3 (subsea clamps)







1

Special clamp, external diameter 8"

(for repair of leakage of subsea oil-gaz pipeline)

Note: required pressure test report under the suvey of internationally recognised classification societies (ABS, DNV, BV and SGS). To be manufactured as per ANSI requirements. Material of steel A216 WCB, material of bolt A193 B7, material of nut A194 2H. C\W oil resistant rubber seal.


piece

1

2

Special clamp, external diameter 12"

(for repair of leakage of subsea oil-gaz pipeline)

Note: required pressure test report under the suvey of internationally recognised classification societies (ABS, DNV, BV and SGS). To be manufactured as per ANSI requirements. Material of steel A216 WCB, material of bolt A193 B7, material of nut A194 2H. C\W oil resistant rubber seal.


piece

2

3

Special clamp, external diameter 20" (530mm)

(for repair of leakage of subsea oil-gaz pipeline)

Note: required pressure test report under the suvey of internationally recognised classification societies (ABS, DNV, BV and SGS). To be manufactured as per ANSI requirements. Material of steel A216 WCB, material of bolt A193 B7, material of nut A194 2H. C\W oil resistant rubber seal.


piece

1

4

Special clamp, external diameter 20" (508mm)

(for repair of leakage of subsea oil-gaz pipeline)



Note: required pressure test report under the suvey of internationally recognised classification societies (ABS, DNV, BV and SGS). To be manufactured as per ANSI requirements. Material of steel A216 WCB, material of bolt A193 B7, material of nut A194 2H. C\W oil resistant rubber seal.

piece

1




LOT-4 (diving accessories and spare parts)







1

Diving whrist type depth gauge 0-80 meter

piece

25

2

Diving jet fins, professional type

pair

30

3

Belt for diving jet fins

piece

80

4

Belt of diving weight

piece

10

5

Control gauge, for diving cylindersç 450 bar, with a red 50 bar low contetnt zone

piece

20

6

High pressure hose of control gauge (for control gauge of position 5)

piece

40

7

High pressure gauge for Divex diving control panel code DD329993

piece

5

8

High pressure 1/2" air needle valve, brass

piece

6

9

High pressure 1/4" air needle valve, brass

piece

6

10

Pressure releif valve for Comex decompression chamber code: REF.130 01060

piece

1

11

Spare parts kit of "Tescom" 44-1323-2121 regulator

piece

2

12

Spare parts kit of "Tescom" 44-1323-2122 regulator

piece

2

13

Seal kit of "Tescom" 44-1323-2121 regulator

piece

2

14

Seal kit of "Tescom" 44-1321-2122 regulator

piece

2

15

Plastic seal kit of "Tescom" 44-1323-2121 regulator

piece

8

16

Plastic seal kit of "Tescom" 44-1323-2122 regulator

piece

12

17

1000 kg soft subsea inflatable buoyancy units

piece

3

18

500 kg soft subsea inflatable buoyancy units

piece

5

19

Washer of BR cutting torch

piece

100

20

BR22 cutting torch

piece

5

21

Repair kit of BR22 cutting torch

piece

3

22

Collet washer of BR22 cutting torch

piece

170

23

"Jupiter" connector, code PCEF10MT0416A110, brass

piece

10

24

"Jupiter" connector, code FEDM10MT0416A110, brass

piece

10

25

Diver safety harness (for emergency evacuation of diver)

piece

5

26

Connector of subsea video camera "Seacon Female MCİL4F"

piece

30

27

Connector of subsea light "Seacon Female MCIL3F"

piece

30

28

Fuse 160mA of subsea video camera

piece

10

29

O-ring of connector of "L3C-720" subsea video camera

piece

10

30

O-ring seal of glass of "L3C-720" subsea video camera

piece

10

31

3r3 resistor of "LED-G-800" subsea light

piece

5

32

PCB of "LED-G-800" subsea light

piece

5

33

Capacitor of "LED-G-800" model subsea light

piece

5

34

Connector of "LED-G-800" model subsea light

piece

5

35

Power regulator of "LED-G-800" subsea light

piece

5

36

O-Ring of of connector of "LED-G-800" subsea light

piece

5

37

O-ring of glass of "LED-G-800" subsea light

piece

5

38

Spare part kit for closed circuit helmet Ultrajewel-601

assy

1

39

Head cushion of KM-37 diving helmet

piece

50

40

Neoprene neck dam of KM-37 diving helmet

piece

20

41

Air flow restricter of KM-17/37 diving helmet

piece

30

42

O-ring seal kit of KM-37 diving helmet

piece

30

43

Repair kit of KM-37 diving helmet

assy

10

44

O-Ring ruber seal kit of SL-17 diving helmet

piece

10

45

KM-37 diving helmet repair kit code 525-349

assy

10

46

KMB-18 diving helmet repair kit code 525-319

assy

5

47

KMB-18 diving helmet repair kit code 525-327

assy

5

48

KMB-18 diving helmet repair kit code 525-358

assy

5

49

KM-37 diving helmet repair kit code 525-363

assy

10

50

Diaphragm of regulator of diving helmet KM-37

assy

30

51

Regulator assy of KM-37 diving helmet

assy

3

52

Neck ring assembly of KM-37 diving helmet

assy

5

53

SL-17 diving helmet repair kit code 525-317

assy

2

54

SL-17 diving helmet repair kit code 525-325

assy

2

55

Bent tube assy of diving helmet, code 555-155

assy

5

56

Regulator rebuilding kit of diving helmet, code 525-309

assy

10

57

Diving helmet O-ring kit code 525-019

assy

5

58

Repair kit of valve of KM-17/37 diving helmet

assy

10

59

Communication kit of KM-17/37 diving helmet

assy

40

60

Communication cable of diving helmet, code 505-047

assy

30

61

Brass adapter of KM-17/37 diving helmet

piece

15

62

Hose of regulator code DD041300/1

piece

20

63

Hose of regulator code DD041400/1

piece

10

64

10L single diving bail out cylinder with reserve pull out

piece

5

65

Valve+rubber seal kit of diving breathing cylinder

piece

15

66

Rubber gasket of diving breathing cylinder

piece

30

67

Manifold of 2x10L diving cylinder, twin outs and emergency valve

piece

5

68

Back pack unit of twin diving air cylinder

assy

4

69

Carabiner hook TO022

piece

50

70

Silicone grease Christo Lube (16 ounces)

piece

30

71

Control gauge, DIN thread (for diving cylinder)

piece

5

72

"Jetstream" 1st stage regulator

piece

20

73

5 element diving umbilical 150 meter length, c\w fittings, as per IMCA standard

piece

2

74

Subsea video system (c\w control console, 15" LCD monitor, DVD recorder, subsea light and subsea camera), portable

assy

2

75

Nut of connector of subsea video camera code "MCDLS-F-SC-R MicroWetcon F"

piece

20

76

Insert of PAL camera of subsea video camera code kod L3C-720-İNT

piece

5

77

Connector of subsea video camera code MCBH-4M-1/2-SS-SC-22AWG

piece

5

78

125 mA Fuse of subsea video camera code WPFUS-032

piece

10

79

O-ring of body of subsea video camera code 202-709

piece

10

80

3 diver communication unit, portable, c\w charger

piece

2

81

"Aquacom SSB-2010" subsea radio station

assy

1

82

Pull pin of KM-37 diving helmet, code 505-110

piece

6

83

Neoprene neck dam of diving helmet, code 510-629

piece

10

84

Head cushion of KMB-18 helmet, code 510-712

piece

10

85

Communication assy of KM-37 diving helmet, code 515-024

piece

10

86

Communication mount kit of KM-37 diving helmet, code 320-026

piece

3

87

O-ring of comm cable of KM-37 diving helmet, code 510-029

piece

3

88

Diving knife belt

piece

20

89

BR45 subsea concrete breaker

piece

1

90

GR29 subsea hydraulic cutter

assy

1

91

Subsea rubber pneumatic lifting bags (full complete assy), lifting capability 50T,

lifting height 40cm



assy

1

92

150 meter hose of subsea hydraulic torque wrench equipment c\w drum

Assy

1

93

Spare part (blader) of WC1250 subsea hydraulic wire cutter

piece

4

94

Shank for Stanley Underwater Breaker BR45, code 07702

piece

2

95

Shank for Stanley Underwater Breaker BR45, code 07703

piece

2

96

Shank for Stanley Underwater Breaker BR45, code 07704

piece

2

97

Seal kit of Stanley BR45 concrete breaker

assy

3

98

O-Ring kit of Stanley BR45 concrete breaker

assy

3

99

Repair kit of accumlator of Stanley BR45 concrete breaker

assy

1

100

Seal kit of Stanley CO23 subsea hydraulic cutter

assy

2

101

Seal kit of Stanley GR29 subsea hydraulic cutter

assy

2

102

Seal kit of Stanley CH15 concrete breaker

assy

2

103

Seal kit of Stanley CH18 concrete breaker

assy

2

104

Screw of KM-37 diving helmet, code 530-015

piece

6

105

Silicone grease "DOW CORNING Molykote" (DC04)

piece

50

106

Oxygen gauge 0-6000 PSI, for 40L transportable oxygen cylinder

piece

3

107

Oxygen gauge 0-1000 PSI, for 40L transportable oxygen cylinder

piece

3

108

Regulator gauge of "Hydra" LARS winch

piece

2

109

Charger of communication unit (CJ 12-2.9 Ah/20hr, PS-1227)

piece

4

Directory: socar


Share with your friends:


The database is protected by copyright ©dentisty.org 2019
send message

    Main page