Information paper protective eyewear



Download 259.88 Kb.
Page2/2
Date conversion08.07.2018
Size259.88 Kb.
1   2




  1. BLPS Replacements. Gaining units/installations are responsible for funding replacements. After units have received their initial push-issue of BLPS, replacements can be ordered by submitting funded requisitions to the DSCP (RIC S9T).




  1. SPECS Detailed Information.




  1. The SPECS are for non-prescription lens wearers. Each SPECS comes in a Kit, consisting of one Clear-Ballistic lens (installed in the SPECS frame), one pop-in Gray-Ballistic (sunglass) lens, one retainer strap, and one hardened plastic case. The SPECS Kits come in two designated sizes: regular and large. NOTE: It is estimated that 70% of SPECS users will require size regular and the remaining 30% will require size large. The clear and gray (sunglass) SPECS Kits provide ballistic fragment eye protection, but no laser protection.




  1. The 2WL and 3WL Laser-Ballistic protective SPECS Kits come in regular and large sizes and contain one 2WL or one 3WL Laser-Ballistic lens, one retainer strap, and one hardened plastic case. Both the 2WL and 3WL SPECS Kits are issued separately. NOTE: It is estimated that 70% of SPECS users will require size regular and the remaining 30% will




  1. Require size large. The Laser Protective versions of the SPECS provide both laser and ballistic fragment protection.


  1. CAUTION: SPECS HAS NOT BEEN FLIGHT TESTED AND SHOULD NOT BE WORN UNDER FLIGHT HELMETS OR USED IN LIEU OF THE VISOR SYSTEMS APPROVED FOR SUCH HELMETS.




  1. Users should be issued the following SPECS components:




    1. One regular or one large SPECS Kit with one Clear-Ballistic Fragment Protective Lens (installed in frame), one Gray-Ballistic Fragment Protective pop-in lens (sunglass), one hardened plastic carrying case, and one retention strap.




    1. One regular or one large SPECS Kit with one 2WL Laser-Ballistic Fragment Protective Lens, one hardened plastic carrying case, and one retention strap. NOTE: The 2WL SPECS should be held in unit storage pending distribution at the discretion of the unit commander, for deployment and/or training purposes only.




    1. The 3WL Laser-Ballistic Fragment Protective SPECS Kit has not been free issued. The 3WL Laser-Ballistic Fragment Protective Kit is available for procurement through DSCP.




  1. SPECS Basis of Issue.




  1. For each soldier not requiring prescription lenses: One regular or large SPECS Kit with one Clear-Ballistic protective spectacle and one Gray-Ballistic (sunglass) pop-in protective lens, and one 2WL Laser-Ballistic Fragment Protective SPECS Kit.




  1. After receipt, the SPECS Kit is to be issued to the designated soldiers. The Laser-Ballistic SPECS Kit, however, is not to be issued directly to individual soldiers. Laser-Ballistic Kits are to be held in unit storage pending distribution at the discretion of the unit commander, for deployment and/or for training purposes only.


  1. SPECS End Item Information.




Item

LIN

Size

NSN

FY03 Unit Price

SPECS, Kit

S49794

Regular

8465-01-416-4626

$15.25

Large

8465-01-416-4629

$15.80

SPECS, 2WL Laser Protective

S49998

Regular

8465-01-416-4634

$19.95

Large

8465-01-416-4632

$21.30

SPECS, 3WL Laser Protective

S50066

Regular

8465-01-416-4635

$19.50

Large

8465-01-416-8516

$19.50

SPECS, Clear-Ballistic Lens (No Carrying Case)

N/A

Regular

8465-01-416-4628

$6.65

Large

8465-01-416-4631

$6.65

SPECS Gray-Ballistic Lens

(No Carrying Case)



N/A

Regular

8465-01-416-4630

$6.70

Large

8465-01-416-4633

$6.70

Carrying Case

N/A

N/A

8465-01-416-4627

$2.90

Retainer Strap

N/A

N/A

8465-01-416-4637

$1.60




  1. SPECS Replacements. Gaining units/installations are responsible for funding replacements. After units have received their initial push-issue of SPECS, replacements can be ordered by submitting funded requisitions to the DSCP (RIC S9T).




  1. SWDG Detailed Information.




  1. Both prescription lens wearers and non-prescription lens wearers may use the SWDG. Users who wear prescription lenses wear the SWDG overtop of their prescription eyewear. The SWDG does not come in designated sizes, as one size fits all.




  1. The SWDG comes in a kit, which includes one Type-3 Clear-Ballistic lens (installed in the goggle frame), one Type-4 Gray-Ballistic lens (sunglass), and one carrying case. A Type-5 2WL Laser-Ballistic lens (green in color) and a Type-6 3WL Laser Ballistic lens (brown in color) are also available.




  1. All SWDG Types provide ballistic fragment eye protection. The Type-5 and Type-6 SWDG provides both laser and ballistic fragment protection.




  1. Users should be issued the following SWDG components:




  1. One SWDG Kit with one Clear-Ballistic Fragment Protective Lens (installed in goggle frame), and one Gray-Ballistic Fragment Protective pop-in Lens (sunglass).




  1. SWD Laser Goggles (2WL and 3WL) are available for requisition through DSCP.




    1. SWDG Basis of Issue.




    1. For each soldier: One SWDG Kit with one Clear-Ballistic Fragment Protective Lens (installed in goggle frame) and one Gray-Ballistic Fragment Protective pop-in Lens (sunglass). SWDG 2WL and 3WL Laser-Ballistic Fragment Protective goggle can be procured based on mission need through DSCP.


    1. After receipt, the SWDG Kit is to be issued to the designated soldiers. The 2WL Laser-Ballistic Fragment Protective Lens, however, is not to be issued directly to individual soldiers. 2WL Laser-Ballistic Fragment Protective Lenses are to be held in unit storage pending distribution at the discretion of the unit commander, for deployment and/or for training purposes only.




  1. SWDG End Item Information.




Item

LIN

Size

NSN


FY03 Unit Price

SWDG Kit (clear and gray lenses)

J71304

One size fits all

8465-01-328-8268

$18.05

SWDG Type 3 Replacement Lens (clear)

N/A

One size fits all

8465-01-109-3997

$2.85

SWDG Type 4 Replacement Lens (gray)

N/A

One size fits all

8465-01-109-3996

$2.95

SWDG Type 5 Lens (2WL)

N/A

One size fits all

8465-01-439-3506

$18.85

SWDG Type 6 Lens (3WL)

N/A

One size fits all

8465-01-439-3511

$44.90




  1. SWDG Replacements. Gaining units/installations are responsible for funding replacements. Replacements can be ordered by submitting funded requisitions to the DSCP (RIC S9T).




  1. Wiley-X SG-I Detailed Information.




  1. The Wiley-X SG-1 is commercially available protective eyewear for non-prescription lens wearers. The goggles provide ballistic and UVA/UVB eye protection. The Wiley-X SG-1 is not authorized for laser eye protection and must not be used for missions or training scenarios that require laser eye protection. The goggles do not have designated sizes, as one size fits all.




  1. The Wiley-X SG-1 is a dual lens eyewear that uses a foam seal around each eye socket to prevent infiltration of wind and dust. The system provides two functions in one: converting from a sunglass to low profile goggle. The lenses provide ballistic fragment protection (clear and sunglass). "Ultra-Foam" seals the eye orbits. The temples disengage with a push of a button and can be replaced with a snap loaded elastic headband.




  1. Units may order the Wiley-X SG-1 by submitting funded MILSTRIP requisitions through normal supply channels to the DSCP General and Industrial (S9I).




  1. Wiley-X SG-1 Goggles Kit Components.




  1. Frame (black plastic frame with foam seals for wind/dust protection).




  1. Clear-Ballistic polycarbonate lens.




  1. Green Smoke-Ballistic polycarbonate lens (sunglass).


Carrying case not shown in photo.



  1. Elastic headband (black in color).




  1. Temple arms (black plastic).




  1. Black carrying case


    1. Wiley-X SG-1 End Item Information.




Item

Unit of Issue

Manufacturer’s Part Number

NSN


FY03 Unit Price

Wiley-X SG-1 Goggles Kit

1 each

SG-1

4240-01-504-0994

$55.20

Clear-Ballistic Replacement Lenses

1 each

SG-1C

4240-01-504-5326

$20.14

Green Smoke-Ballistic (sunglass) Replacement Lenses

1 each

SG-1G

4240-01-504-5312

$20.14

Elastic Strap Replacement

1 each

SG-1E

4240-01-504-5754

$6.71

Replacement Frame (includes temples and strap)

1 each

SG-1F

4240-01-504-6524

$33.58

Replacement Temples

1 each

SG-1T

4240-01-504-6474

$6.71



  1. ESS Land Operations Goggles Detailed Information.




  1. The ESS Land Operations Goggles with anti-reflective sleeve is commercially available protective eyewear for both prescription and non-prescription lens wearers. The goggles provide ballistic and UVA/UVB eye protection. The ESS Land Operations Goggles ESS do not have an approved laser protective lens and, therefore, are not authorized for laser eye protection. The goggles must not be used for missions or training scenarios that require laser eye protection. The ESS Land Operations Goggles do not have designated sizes, as one size fits all.




  1. The ESS Land Operations Goggles have an injection molded rubber frame with polyurethane foam backing with a foam skin that contacts the face. The rubber frame holds the lens while the foam interface provides a seal between the face and goggle frame. Foam covered vent holes allow some ventilation while keeping dust out. The clear and sunglass lenses are a single piece, simple curve, injection molded, high impact polycarbonate design with anti-scratch and anti-fog coatings. The lens has a nominal thickness of 2.4 mm, provides ballistic-fragment protection, and meets US military MIL V-43511C ballistic impact requirements. The anti-reflective sleeve reduces glint when the goggle is not in use. The ESS Land Operations Goggle’s weight of 4.1 ounces is comparable to the SWDG. The ESS Land Operations Goggles are also available without the anti-reflective sleeve.




  1. Units may order the ESS Land Operations Goggles with anti-reflective sleeve by submitting funded MILSTRIP requisitions through normal supply channels to the DSCP General and Industrial (S9I).


  1. ESS Land Operations Goggles Components.




    1. Frame (neoprene rubber olive green in color with black elastic web strap).




    1. Clear-Ballistic polycarbonate lens (replacements come in a pack of 50 each).




    1. One Smoke Gray-Ballistic (sunglass) polycarbonate lens (replacements come in a pack of 50 each and are procured separately from the goggle).


Carrying case and anti-reflective sleeve not shown in photo.



    1. One Black carrying case




    1. One Antireflective Sleeve




  1. ESS Land Operations Goggles End Item Information.




Item

Unit of Issue

Manufacturer’s Part Number

NSN


FY03 Unit Price

ESS Land Operations Goggles (with anti-reflective sleeve)

1 each

ESS 01OV-ML-S

4240-01-504-0052

$33.41

ESS Land Operations Goggles (without anti-reflective sleeve)

1 each

ESS01OV-ML

4240-01-479-8657

$29.34

Clear-Ballistic Replacement Lenses

50 each

EL-4

4210-01-492-5722

$307.94

Smoke Gray-Ballistic Replacement Lenses

50 each

EL-5

4210-01-492-5725

$ 307.95




  1. ESS Low Profile NGV Goggles With Anti-reflective Sleeve Detailed Information.




    1. The ESS Low Profile NVG Goggles with anti-reflective sleeve is commercially available protective eyewear for non-prescription lens wearers. The goggles provide ballistic and UVA/UVB eye protection. The ESS Land Operations Goggles do not have an approved laser protective lens and, therefore, are not authorized for laser eye protection. The goggles must not be used for missions or training scenarios that require laser eye protection. The ESS Low Profile NVG Goggles do not have designated sizes, as one size fits all.




    1. The ESS Low Profile NVG Goggles have an injection molded rubber frame with rubber goggle seal that contacts the face. The rubber frame holds the lens. Foam covered vent holes allow ventilation while keeping dust out. The clear and sunglass lenses are a single piece, simple curve, injection molded, high impact polycarbonate design with anti-scratch and anti-fog coatings. The lens has a nominal thickness of 2.8 mm, provides ballistic-fragment protection, and meets all ANSI Z87.1 requirements and the rigorous MIL-V-43511C .22 caliber ballistic impact test. Clear and sunglass lenses offer 100% UVA/UVB protection and distortion-free optics. The anti-reflective sleeve reduces glint when the goggle is not in use. The ESS Low Profile NVG Goggle’s weight of 4.1 ounces is comparable to the SWDG.


  1. Units may order the ESS Low Profile NVG Goggles with anti-reflective sleeve by submitting funded MILSTRIP requisitions through normal supply channels to the DSCP General and Industrial (S9I).




  1. ESS Low Profile NVG Goggles Components.




    1. Frame (neoprene rubber comes in military green or tactical black or desert tan) with black elastic web strap.




    1. Clear-Ballistic polycarbonate lens (replacements come in a pack of 50 each).




  1. One Smoke Gray-Ballistic (sunglass) polycarbonate lens (replacements come in a pack of 50 each and are procured separately from the goggle).


Carrying case and anti-reflective sleeve not shown in photo.



  1. One Black carrying case




  1. One Antireflective Sleeve




      1. ESS Low Profile NVG Goggles End Item Information.




Item

Unit of Issue

Manufacturer’s Part Number

NSN


FY03 Unit Price

ESS Low Profile NVG Goggles (with anti-reflective sleeve and tactical black frame)

1 each

EP-01BK1-TSB

4240-01-504-6222

$60.44

ESS Low Profile NVG Goggles (with anti-reflective sleeve and tactical military green frame)

1 each

EP-01OD1-MSB

4240-01-504-5706

$60.44

ESS Low Profile NVG Goggles (with anti-reflective sleeve and tactical desert tan frame)

1 each

EP-01DT1-MSB

4240-01-504-5727

$60.44

Clear-Ballistic Replacement Lenses

50 each

PR50C

4240-01-504-5641

$ 523.94

Smoke Gray-Ballistic Replacement Lenses

50 each

PR50Y

4240-01-504-6143

$ 523.94

10. Procurement Points of Contact for Commercial Goggles (Wiley X SG1 and ESS Land Operation and Low Profile Goggles).


DSCP Contracting Officer:

Ms. Diane Neff

215-737-2722 / FAX: 215-737-4045

Email: dneff@dscp.dla.mil

DSCP-IDA

Defense Supply Center Philadelphia

700 Robbins Avenue

Philadelphia, PA 19111-5092


Technical Buying Point of Contact:

Shirley Jones

215-737-4421 / DSN 444-4421

Email: Shirley.B.Jones@dla.mil

Fax 215-737-4045
11. BLPS/SPECS and SWDG Points of Contact:
Fielding Office:

Mr. Myron Pross (SPECS/BLPS)

US Army Soldier and Biological Chemical Command

Project Manager-Clothing and Individual Equipment (Philadelphia)

700 Robbins Ave., P.O. Box 57997

Philadelphia, PA 19111-5092

Email: mpross@dscp.dla.mil

Phone: DSN 444-2510(215-737-2510)


Ms. Diane Gomez (SWDG)

US Army Soldier and Biological Chemical Command

Project Manager-Clothing and Individual Equipment (Philadelphia)

700 Robbins Ave., P.O. Box 57997

Philadelphia, PA 19111-5092

Email: diane.gomez@dscp.dla.mil

Phone: DSN 444-7287(215-737-7287)

12. Technical Points of Contact for all spectacles/goggles:




Assistant Product Manager (APM)-Chem. Bio/Eyewear


Sarah Morgan-Clyborne

Product Manager – Clothing and Individual Equipment

ATTN: SFAE-SDR-CIE

10125 Kingman Road

Fort Belvoir, VA 22060-5820

Email: sarah.morgan-clyborne@peosoldier.army.mil

Phone: (703) 704-3826

FAX: (703) 704-3841/37


Technical Points of Contact:

Harold Moody and Michelle Markey


U.S. Army Soldier Biological and Chemical Command Natick Soldier Center

Army Soldier Systems Engineering Team (ASSET)

ATTN: AMSSB-RIP-A(N)

Kansas Street, Natick, MA 01760

E-mail: harold.moody@natick.army.mil

Phone: DSN 256-5580 (508-233-5580)

FAX: DSN 256-4795

E-mail: michelle.markey@natick.army.mil



Phone: DSN 256-5471 (508-233-5471)


NOTE: Training videos for SPECS and BLPS can be obtained by contacting the Product Manager’s Office, POC is Ms. Sarah Morgan-Clyborne, DSN 654-3826 or COMM 703-704-3826.
As of date: 14 August 2003 Page -10


1   2


The database is protected by copyright ©dentisty.org 2016
send message

    Main page