Table of contents introduction



Download 1.63 Mb.
Page19/50
Date conversion08.07.2018
Size1.63 Mb.
1   ...   15   16   17   18   19   20   21   22   ...   50

TRAINING AND EVALUATION REQUIREMENTS:


  1. Training. Training will be conducted in the aircraft.

  2. Evaluation. Evaluation will be conducted in the aircraft.
  • REFERENCES: Appropriate common references.


    1. 1032

      1. PERFORM RADIO COMMUNICATION PROCEDURES.
    1. CONDITIONS: In an OH-58D helicopter.

    2. STANDARDS: Appropriate common standards plus the following:


      1. Check and operate aircraft radios.

      2. Establish and maintain radio contact with the desired unit or ATC facility.

      3. Operate intercom system.

      4. Perform two-way radio failure procedures per the FIH or host country regulations.
    3. DESCRIPTION:


      1. Crew actions.

            1. The PC will assign radio frequencies per mission requirements during the crew briefing and will indicate which crewmember will establish and maintain communications.

            2. The P* remains focused outside the aircraft. He is responsible for clearing the aircraft and obstacle avoidance. He will maintain communications on his assigned radios.

            3. The P will monitor radios and perform frequency changes as directed. He will copy/read pertinent information as requested by the P*. In case of two-way radio failure, the P will attempt to reestablish communication.

      2. Procedures. Set radios, frequencies, and digital nets as required. Copy pertinent information. Select the proper frequency on the RFD as required/directed. Continuously monitor the radios as directed by the PC. Monitor the frequency before transmitting. Use the correct radio call sign when acknowledging each communica­tion. When advised to change fre­quencies, acknowledge the in­struc­tions. Select, or request the other crewmember to select, the new frequency as soon as possible unless instructed to do so at a specified time, control measure, fix, or altitude. Use standard radio communication procedures, terms and phraseology as appropriate for the area and type of operations.
    4. TRAINING AND EVALUATION REQUIREMENTS:


      1. Training. Training may be conducted in the aircraft, CPT or CSMET.

      2. Evaluation. Evaluation will be conducted in the aircraft, CPT or CSMET.
    5. REFERENCES: Appropriate common references.


    1. 1036

      1. PERFORM ECM/ECCM PROCEDURES
    1. CONDITIONS: In an OH-58D helicopter and given signal operation instructions.

    2. STANDARDS: Appropriate common standards plus the following:


      1. Operate secure communications equipment (KY-58, KY-100 if installed) and avionics.

      2. Maintain radio discipline at all times.

      3. Use SOI/ANCD.

      4. Recognize and respond to all threat electronic warfare actions.
    3. DESCRIPTION:


      1. Crew actions.

            1. The PC will assign radio frequencies per SOI and mission requirements during the crew briefing.

            2. The P* will announce mission information not monitored by the P and any deviation from directives.

            3. The P will announce information not monitored by the P*.

      2. Procedures.

            1. Voice Communication. Voice communication in a tactical environment should only be used when absolutely necessary. If voice communication is required, the best method is to operate in the secure voice mode. To eliminate confusion and reduce trans­mission time, use approved communication words, phrases, and codes (Plan what to say before keying the trans­mitter.). Use approved communication words, phrases, and must transmit information clearly, concisely, and slowly enough to be understood by the receiving station. (Ideal­ly, transmissions should be kept under ten seconds.) A unit or an individual must not be identified by name during non-secure radio transmissions.

            2. Digital Communication. If the enemy is not jamming, use the lowest FM power setting required, the lowest block selection (single), and the highest baud rate.

            3. Communication Considerations.

          1. Authentication. Use proper SOI proce­dures to authenticate all in‑flight mission changes and artillery advisories when entering or departing a radio net or when chal­lenged.

          2. MIJI procedures. Keep accurate and detailed records of any MIJI incidents suspected to be intention­al interference. Use a secure communication means to report the incident as soon as possible.

          3. SIF/IFF usage. During radio checks, select the appropriate transponder mode on the selector and test the system. Monitor the SIF/IFF reply indications during the flight.

          4. Antijamming procedures. To overcome jamming reconfigure the ATHS/IDM. Change the block selection to double and lower the baud rate. In addition, use high frequency, FM frequency hopping, Have Quick, or change the FM power setting to HIGH. Changes must be coordinated with other aircraft per the unit SOP to ensure uninterrupted reception.

            1. Radio Silent Operations. Combat operations may require crews to fly missions without the use of radios. Alter­nate means of communication are briefly described below.

            2. Visual methods. The unit SOP and SOI describe these methods in detail.
    4. TRAINING AND EVALUATION REQUIREMENTS:


      1. Training. Training will be conducted in the aircraft.

      2. Evaluation. Evaluation will be conducted in the aircraft.
  • 1   ...   15   16   17   18   19   20   21   22   ...   50


    The database is protected by copyright ©dentisty.org 2016
    send message

        Main page