[state] Part 6 — Approved Maintenance Organisation



Download 334.35 Kb.
Page1/11
Date conversion19.11.2016
Size334.35 Kb.
  1   2   3   4   5   6   7   8   9   10   11
Model CIVIL AVIATION Regulations

[STATE]

Part 6 — Approved Maintenance Organisation

VERSION 2.8

November 2014

[THIS PAGE INTENTIONALLY LEFT BLANK]
AMENDMENTS

Location

Date

Description

Introduction

11/2012

Added references to ICAO Doc 9760

Introduction

11/2014

Updated ICAO references used

6.1.1.2

8/6/2006

Added definitions of: directly in charge and line maintenance are renumbered accordingly. Changed “specific operating provisions” to “operations specification” per ICAO change

6.1.1.2

9/29//2011

Added definition: "Maintenance Procedures Manual"

6.1.1.2

5/25/2010

Added definition: "Safety Management System"

6.1.1.2

5/25/2010

Added definition: "State Safety Programme "

6.1.1.2

11/2014

Moved definitions to MCAR Part 1

6.1.1.3

12/21/2004

“Acronyms” changed to “Abbreviations”

6.1.1.3

8/6/2006

Deleted “Parts Manufacturing Authorisation

6.1.1.4

8/6/2006

Moved 6.1.1.4 from previous versions to 6.2.1.3







Moved 6.1.1.6 “Deviation Authority” from previous version to 6.1.1.4 and replaced “deviation” with “exemption” and revised text accordingly

IS 6.1.1.4(D)

12/21/2004

Signature line for “CAA Office” added to form.

IS 6.1.1.4 (D)

8/6/2006

Moved to IS: 6.2.1.3

6.2

8/6/2006

Added “and continued validity of an approved maintenance organisation” to the title

6.2

9/29/2011

Changed wording of text

6.2.1.1

8/6/2006

Added new paragraph on applicability and moved Application for an AMO Certificate (formerly 6.2.1.1 in previous versions) to 6.2.1.5

IS 6.2.1.1

12/21/2004

Form title changed to “CAA AAMO Form”

IS 6.2.1.1

8/6/2006

Moved to IS: 6.2.1.5

6.2.1.2

8/6/2006

Added new paragraph on general requirements

6.2.1.2(c)

8/6/2006

Added new paragraph on general requirements

6.2.1.2(c)

11/2013

Added new text to reflect SMS requirements per ICAO Annex 19

6.2.1.3

8/6/2006

Moved from 6.1.1.4 in previous versions; changed “specific operating provisions” to “operations specification” per ICAO change

6.2.1.4

8/6/2006

Moved from 6.1.1.5 in previous versions

6.2.1.5

8/6/2006

Moved from 6.2.1.1 in previous versions; added new 6.2.1.5(a)(5) to reference the quality system

6.2.1.5

5/25/2010

Changed wording of the title

6.2.1.6

8/6/2006

Moved from 6.2.1.2 in previous versions

6.2.1.7

8/6/2006

Moved from 6.2.1.3 in previous versions; deleted paragraph (a) and renumbered accordingly; (b) changed “specific operating provisions” to “operations specification” per ICAO change; (d)(2) deleted and (d)(1) combined into (d)

6.2.1.7

9/27/2011

Changed text (a) 1, 2 and (b) (c )

6.2.1.8

8/6/2006

Moved from 6.2.1.4 in previous versions

6.2.1.9

8/6/2006

Moved from 6.2.1.5 in previous versions

6.2.1.9

927/2011

Added new section “Inspection”

6.2.1.10

8/6/2006

Moved form 6.2.1.6 in previous versions; entire paragraph rewritten to reflect new changes in 14 CFR Part 145.59

6.2.1.0

927/2011

Added new section “Suspension and Revocation”

6.2.1.11

8/6/2006

Moved from 6.2.1.7 in previous versions;

6.2.1.11

9/27/2011

Previous 6.2.1.9 moved to 6.2.1.11 – Changes To The AMO and Certificate Amendments

6.2.1.11(a)(6)

9/27/2011

Added text “ Items in Maintenance Procedures Manual

6.2.1.11(b)(4)

9/27/2011

Added text “ Items in Maintenance Procedures Manual

6.2.1.11(c )(3)

9/27/2011

Added text “ Items in Maintenance Procedures Manual

6.2.1.12

8/6/2006

Requirements for quality assurance system split out from 6.5.1.2 to avoid confusion with an AMO internal inspections requirements vs. a quality assurance system

6.2.1.12

9/27/2011

Previous 6.2.1.10 moved to 6.2.1.12 – Ratings of an AMO

6.2.1.12(a)(2)

5/25/2010

Changed reciprocating to piston

6.2.1.13

9/27/2011

Previous 6.2.1.11 moved to 6.2.1.13 – AMO limited Ratings

6.2.1.14

9/27/2011

Previous 6.2.1.12 moved to 6.2.1.14 – Quality System

6.2.1.15

11/2013

Added new paragraph for location of the AMO

6.3

8/6/2006

“Data” added to title

6.3.1.1(a)

8/6/2006

“Personnel” deleted; “housing” and “data” added

6.3.1.2(a)

8/6/2006

Reworded to include protection of equipment, materials and personnel from weather

6.3.1.2(g)(h)

8/6/2006

New requirements added

6.3.1.3

8/6/2006

New item (c) added and remaining items renumbered; note referencing the IS made into item (g)

6.3.1.3

12/21/2004

New item (d). Old item (d) now item (e)










IS 6.3.1.3

12/21/2004

New items (a), (b), and (d) through (h). Existing items renumbered.

6.4 1.1

8/6/2006

“training” deleted from title; new items (f) and (h) added and remaining items renumbered; note referencing the IS made into item (g); new note added

6.4.1.2

8/6/2006

New paragraph added on training requirements; paragraph 6.4.1.2 in previous versions on rest and duty time moved to 6.4.1.4

6.4.1.2 (a)(4)

9/27/2011

Added new text and note

6.4.1.3

8/6/2006

New paragraph added on dangerous good training; paragraph 6.4.1.3 in previous versions on record of certifying staff moved to 6.4.1.5

6.4.1.4

8/6/2006

Moved from 6.4.1.2 in previous versions

6.4.1.5

8/6/2006

Moved from 6.4.1.3 in previous versions; added requirements for “management, supervisory, and inspection” staff; made the note referencing the IS into new item (c)

6.4.1.6

11/1/2009

Added Safety Management

6.4.1.6

9/29/2011

Removed SMS text, added reference to 1: 1.6

6.5.1.1(e)

8/6/2006

Made the note referencing an IS into new item (e)

6.5.1.1

9/29/2011

Revised the paragraph based on revised ICAO guidance

6.5.1.2

8/6/2006

Deleted references to the quality system and moved those to new 6.2.1.12

6.5.1.2

9/29/2011

Changed title and text – Maintenance Inspection Procedures and Quality Assurance Systems

6.5.1.4

8/6/2006

New paragraph added on contract maintenance and remaining paragraphs renumbered

6.5.1.4 (a) ( d)

9/29/2011

Language change - removed “maintenance” replaced with “AMO” and added text

6.5.1.5

8/6/2006

Moved form 6.5.1.4 in previous versions

6.5.1.5

9/29/2011

Language change - removed “maintenance” replaced with “AMO” and added text

6.5.1.6

8/6/2006

Moved from 6.5.1.5 in previous versions

6.5.1.6( c)

9/29/2011

Added text

6.5.1.7

8/6/2006

Moved from 6.5.1.6 in previous versions; paragraph rewritten

6.5.1.7

9/29/2011

Changed - Certificate of Release to Certification of Release through document

6.5.1.8

8/6/2006

Moved from 6.5.1.7 in previous versions

6.5.1.9

8/6/2006

Moved from 6.5.1.8 in previous versions

6.5.1.9

11/2013

Updated title

6.5.1.10

8/6/2006

Moved from 6.5.1.9 in previous versions with requirements in item (b) expanded

6.5.1.11

8/6/2006

Moved from 6.5.1.10 in previous versions

6.5.1.12

8/6/2006

Moved from 6.5.1.11 in previous versions; “AMO” added to the title; item (a) “air operator” changed to “AOC holder”

IS: 6.2.1.1

8/6/2006

Changes made to block 3, ratings, to match changes in text at 6.2.1.1

IS: 6.2.1.3

8/6/2006

Moved from IS 6.1.1.4 (D) in previous versions

IS: 6.2.1.3

11/2013

Made editorial revisions to form

IS 6.2.1.5

8/6/2006

Moved from IS 6.2.1.1 in previous versions

IS: 6.2.1.6

8/6/2006

Deleted

IS: 6.2.1.12

11/2012

Added organisational chart of qualify system for a large AMO

IS: 6.4.1.2

8/6/2006

New IS added

IS: 6.4.1.2 (a)(4)

9/29/2011

Added text and note

IS: 6.4.1.3

8/6/2006

New IS added on dangerous good training programme; previous IS 6.4.1.3 moved to IS: 6.4.1.5

IS: 6.4.1.5

8/6/2006

Moved from IS: 6.1.4.3 in previous versions; title and (b) and (f) edited to include: management, supervisory and inspection staff

IS: 6.4.1.6

5/25/2010

New IS added: State Safety Programme and reference

IS: 6.4.1.6

9/29/2011

Removed SMS text – Refer to MCAR 1:1.6

IS: 6.5.1.1

8/6/2006

Item (d) rewritten; For sample maintenance procedures manual -- Part 5: 5.1 text added and new Part 6 added

IS 6.5.1.1

9/29/2011

Revised the IS based on revised ICAO guidance

IS: 6.5.1.1

11/2013

Revised text at items 2.4 and 7.0, 7.1

IS: 6.5.1.2

8/6/2006

Deleted

IS: 6.5.1.7

8/6/2006

Moved from IS: 6.5.1.6 in previous versions; text in paragraphs (a)-(g) deleted and moved to 6.5.1.7. Form revised to mirror the harmonised forms of the FAA, EASA and Transport Canada and new explanation added on how to use the form. Form is revised after block 13 to the end.

IS: 6.5.1.7

5/25/2010

Added additional notes and clarification to the instructions for the form

IS: 6.5.1.9

8/6/2006

Moved from IS: 6.5.1.8 in previous versions

IS: 6.5.1.9

11/2013

Updated title

[THIS PAGE INTENTIONALLY LEFT BLANK]

Introduction

Part 6 of the Model Regulations provides regulations for the registration and monitoring of Approved Maintenance Organisations (AMO) in [STATE]. The proper maintenance of aircraft is fundamental to aviation safety, and requires meticulous record keeping. Modern practice among Contracting States varies. In the United States, persons may be individually licensed, or may be granted maintenance authority as a member of an AMO. Similarly, a United States Air Operator Certificate (AOC) holder may use an AMO, or may employ a maintenance organisation using licensed personnel. In the European Joint Aviation Authorities (JAA) and now European Aviation Safety Authority (EASA) practice, the maintenance organisation of an AOC holder must qualify as an AMO in its own right. Whether or not [STATE] adopts the Federal Aviation Administration (FAA) or JAA approach with their AOC holders, there will be a need for oversight and regulation of AMOs. Maintenance requirements for AOC holders with integral maintenance organisations with no AMO certificate are addressed in Part 9, Air Operator Certification and Administration. Please note that Section 6.2.1.5(a)(4) requires an AMO applicant within [State] to disclose any and all AMO certificates in any Contracting State other than [STATE]. Many regional airline consortia use common maintenance facilities in one Contracting State. This practice does not relieve [STATE] from approving the AMO that its AOC holders use. Knowledge of the other Contracting State’s AMO licensing and regulating practices will allow the Authority both to communicate with the Authority overseeing the AMO certificate, and to weigh the AMO requirements of the other Contracting State for satisfaction of [STATE]’s own regulations. MCAR 6 is based on Amendment 37-A and B to Annex 6 Part I, Chapter 8:8.7, and the ICAO Doc 9760, Airworthiness Manual, Third Edition (2013).



[THIS PAGE INTENTIONALLY LEFT BLANK]

Contents

Part 6— Approved Maintenance Organisation 12

6.1General 12

6.1.1.1Applicability 12

6.1.1.2Definitions 12

6.1.1.3Abbreviations 12

6.1.1.4Exemption Authority 12

6.2Certification of a Maintenance Organisation and Continued Validity 12

6.2.1.1Applicability 12

6.2.1.2General 12

6.2.1.3Approved Maintenance Organisation Certificate 13

6.2.1.4Advertising 13

6.2.1.5Application for an AMO Certificate 14

6.2.1.6Issuance of an AMO Certificate 14

6.2.1.7Duration and Renewal of AMO Certificate 15

6.2.1.8Continued Validity of Approval 15

6.2.1.9Inspection 15

6.2.1.10Suspension or Revocation 16

6.2.1.11Changes to the AMO and Certificate Amendments 16

6.2.1.12Ratings of the AMO 17

6.2.1.13AMO Limited Ratings 18

6.2.1.14Quality System 19

6.2.1.15Location of the AMO 20



6.3Housing, Facilities, Equipment, Materials and Data 20

6.3.1.1General 20

6.3.1.2Housing and Facility Requirements 20

6.3.1.3Equipment, Tools, and Material 20



6.4Administration 21

6.4.1.1Personnel Requirements 21

6.4.1.2Indoctrination, Initial, Recurrent, Specialised and Remedial Training 22

6.4.1.3Dangerous Goods Training Programme 22

6.4.1.4Rest and Duty Limitations for Persons Performing Maintenance Functions in an AMO 23

6.4.1.5Records of Management, Supervisory, Inspection and Certifying Staff 23

6.4.1.6 Safety Management 23

6.5AMO Operating Rules 23

6.5.1.1AMO Procedures Manual 23

6.5.1.2Maintenance Inspection Procedures and Quality Assurance Systems 24

6.5.1.3Capability List 24

6.5.1.4Contract Maintenance 25

6.5.1.5Privileges of the Approved Maintenance Organisation 26

6.5.1.6Limitations on the AMO 26

6.5.1.7Certification of Release to Service of an Aircraft, Part, Component or Assembly 26

6.5.1.8Maintenance Records 27

6.5.1.9Airworthiness Data- Instructions For Continued Airworthiness 29

6.5.1.10Reporting of Unairworthy Conditions 29

6.5.1.11Authority to Conduct Inspections 30

6.5.1.12AMO Performance Standards 30

PART 6 — IMPLEMENTING STANDARDS 35


Part 6— Approved Maintenance Organisation

  1   2   3   4   5   6   7   8   9   10   11


The database is protected by copyright ©dentisty.org 2016
send message

    Main page