Specifications



Download 1.5 Mb.
Page1/33
Date16.07.2018
Size1.5 Mb.
  1   2   3   4   5   6   7   8   9   ...   33

Specifications



3225B/3235B


Make Yanmar 3TNE84-EJFE

Engine Type Diesel

Horsepower (maximum rated) 28.3 kW (38.5 hp)

Governed Horsepower 24 kW (32 hp)

Cylinders Three

Stroke/Cycle Four

Displacement (27.8hp) 1.331 L (81.2 cu in)

Lubrication Pressurized

Air Cleaner Dual element, dry-type

Fuel System


Fuel Diesel

Fuel Pump Mechanical


Electrical System


Alternator 40 amp

Charging System Automotive Type

Battery 480 CCA 12 volts

Capacities

3225B/3235B


Fuel Tank 37.8 L (10 gal)

Hydraulic Reservoir 45.4 L (12 gal)

Cooling System 7.6 L (8 qt)

Engine Oil (with filter) 5.5 L (5.8 qt)

Engine Oil (without filter) 5.0 L (5.3 qt)

Drive Train


Transaxle Hydrostatic

Number of Speeds Infinite (within range)


Travel Speeds

3235B


Mowing* 0-12 km/h (0-7.5 mph)

Forward* 0-20 km/h (0-12.5 mph)

Reverse 0-8.0 km/h (0-5 mph)

*Top mowing speed for both models and forward transport speed for 3235B can be regulated by Mow/Transport Speed Adjustment.


Steering and Brakes


Brakes Type Dual Disc/Hydrostatic

Steering Power Steering


Dimensions


Overall Height 1.38 m (54.5 in)

Total Height with ROPS 1.95 m (78.2 in)


Overall Width


Transport Width 2.2 m (86.5 in.)

Mowing Position Width 2.8 m (110 in.)

Overall Length 2.8 m (110 in.)

Tires

Front


Dimensions 26.5 x 14.00-12 turf

Air Pressure 83-104 kPa (12-15 psi)


Rear


Dimensions 20 x 10.00-8 turf

Air Pressure 83-104 kPa (12-15 psi)


Recommended Lubricants


Engine Oil John Deere PLUS-50

Engine Coolant Ethylene Glycol Base

Transmission Oil John Deere J20C HY-GARD® Transmission/Hydraulic Oil

Grease John Deere MOLY HIGH TEMPERATURE EP GREASE


Operating Machine



DAILY OPERATING CHECKLIST


o Test safety systems.

o Check tire pressure.

o Check fuel level.

o Check coolant level.

o Check engine oil level.

o Check hydraulic oil level.

o Remove grass and debris from machine.

o Check hoses.

o Check around hose fittings for leaks.

o Check Air Restriction Indicator.

o Check reels and bed knives for sharpness and nicks.

o Check reel-to-bedknife settings (22 ESP).

o Check bedknife-to-reel settings (2500M).

o Check cutting height.

o Grease front and rear rollers.

o Grease reel bearings.

o Grease lift arm pivots.

o Grease RFS springs (22 ESP).

o Grease lift cylinder ends.

Avoid Damage To Plastic And Painted Surfaces


· Insect repellent spray may damage plastic and painted surfaces. Do not spray insect repellent near machine.

· Be careful not to spill fuel on machine. Fuel may damage surface. Wipe up spilled fuel immediately.


Dash Controls


M79055

A - Lift/Lower Lever

B - Hour Meter

C - Indicator Light Module

D - Fuel Gauge

E - Light Switch (Optional)

F - Cold Start Switch

G - Power Assist Switch (Optional)

H - Mow/Transport Lever



I - Throttle Lever



Share with your friends:
  1   2   3   4   5   6   7   8   9   ...   33


The database is protected by copyright ©dentisty.org 2019
send message

    Main page