San franciso fire department blouse coat united uniform manufacturers



Download 0.64 Mb.
Page12/12
Date30.04.2018
Size0.64 Mb.
1   ...   4   5   6   7   8   9   10   11   12




ITEM #

DESCRIPTION

MANUFACTURER

MODEL #


25


SAN FRANCISCO FIRE DEPARTMENT

RAIN PANTS



GERBER


911 RAIN PANT

SPECIFICATIONS AND ESSENTIAL FEATURES

GENERAL DESIGN:

The rain pant is waterproofed and breathable, fully cut, and well-balanced. Fully stitched, elasticized waistband with drawstring, plain hem bottoms, cargo pockets, no fly opening and knee reinforcements. 2" 3M SCOTCHLITE silver tape or triple trim set around both knees. The end of the pant leg will be finished with a zipper opening and snap adjustment. Garment must be independently certified to the standards of NFPA 1999, latest edition by Underwriters Laboratories. Reference product is Gerber’s identification number 40L_ 911 Rain Pant. Color in Dark Navy.






I. FABRIC/MATRIALS




TRI-LAMINATE 3X All weather laminate technology fabric, 3 ply construction of

100% nylon outer shell, barrier membrane and 100% polyester tricot. Constructed with

the barrier at the outer shell and seam sealed. In Dark navy or Lime-yellow colors.6. Removable Insulated Liner: 6 inch diamond pattern quilted insulation package. 6 oz per sq. yd. Polyester velour pile fleece face fabric for body. 70 denier nylon taffeta face fabric for sleeves. Thermolite Plus or B.Warm BSCL-120 insulation for sleeves. 70 denier nylon taffeta backing fabric for body and sleeves. Fiber migration resistant construction and treatment with no added layers of scrim. Machine washable/dryable, drycleanable, and can be pressed. Shrinkage less than 2%. (Color: black)
Shell Type: 100% taslanized nylon 70 denier in the warp and the filling, plain weave, 3-

ply thread construction.


Thread Count: Warp 154, filling 62 (+-5%)

Weight Coated: 5.9 ounces per square yard (+-5%)

The resulting material shall have the minimum properties.
Characteristic Test Method Requirement
Waterproofness FED STD 191 A 5512 125

Durability of waterproofness

Original FED STD 191 A 5516 Pass

After dry cleaning FED STD 191 A 5516 Pass

After 100 hours flex FED STD 191 A 5516 Pass

Breathability ASTM E 96-93 Procedure B 700

ASTM E 96-93 Procedure BW 7000

Breaking strength, lbs CGSB-4, METHOD 9.2 290 warp,195 fill

Tearing strength, lbs CGSB-4, METHOD 12.1 14 warp, 13 fill

Delamination 5 washings at 140 degrees Pass

Resistant to common chemicals Pass

Documented quality system ISO 9001:2000 Pass

Blood borne pathogen resistance NFPA 1999, 2008 edition Pass





INTERLINING:

White Pellon.






ZIPPERS:

The leg zipper shall be a coil, YKK, one slider.






SNAPS:

The snaps shall be universal prong snaps that have been oxidized to prevent rusting.






THREAD:

All thread shall be polyester thread with a wrap with 36 strength in a 50 size or better.






EYELETS:

Black, metal, small.






ELASTIC:

Natural color, 2" wide dry cleanable and washable.






BUNGEE CORD:

Black, 1/8", elasticized.






BARREL CLIPS:

Black, 3/4" long.






VELCRO:

Black, 1" hook and loop.






II. DESIGN FEATURES




POCKETS:

On each out-seam there shall be cargo pockets that measure 8-3/8" wide by 9-3/8" long with a 1-3/4" extension for utility use. There shall be beveled straight flaps that are 3-1/2" wide by 8-1/2" long. The pocket flaps shall be set 8" down from the waistband. The pockets shall have a velcro closure, 1" by 1-1/2" hook will be set vertically, the flap velcro shall be 1" by 2" and set horizontally. Pockets will be bar-tacked on the stress points. The pockets will be sewn down with a double needle stitch.






WAISTBAND:

There will be a waistband that measures 2" wide and is completely elasticized. The elastic shall be held with two rows of stitching and the setting stitch. Centered inside of the stitch lines shall be a 1/8" black bungee cord with barrel clips at the ends for adjustment. The bungee cord will exit via a round eyelet that is placed exactly in the front center of the waistband.






ZIPPERED LEG CUFFS:

The cuff of the leg shall have a zippered cuff to allow easy donning and doffing. The opening shall have a #6 size coil zipper, 10" long with one slider. The pants will be finished with a ¾" plain hem. There shall be large snaps just above the hem for leg adjustment.






KNEE REINFORCEMENT:

The front knee reinforcement shall measure 8" high and the width shall be side seam to side seam. The knee reinforcement shall be set approximately ½" above the trim.






BLOOD BARRIER:

The blood and liquid barrier shall be permanently applied on the under side of the outer shell of the jacket so that the contaminants will not enter the interior of the jacket. This construction requires seam sealing all of the external seams and pocket sewing to prevent leakage. Only certified NFPA tape is to be used. Interior barriers that are located on the lining or loose sub-straits are not to be used due to contaminants entering the outer shell.






SEAM SEALING:

All external seams and sewing are to be seam sealed with a 7/8" wide seam sealing tape that is set with a hot air seam sealing machine. Seams are to be randomly tested with a suttor tester 3 psi for 3 minutes. A log shall be maintained to record the testing results.






LABELS:

Each garment shall have a NFPA 1999 label, certification label, care instruction label, an ID label and permanent size labels.






CERTIFICATION LABEL:

Each garment shall have a permanent certification label denoting the third party approval with compliant information.






TRACEABILITY:

Each garment shall have its own serial number so that each garment can be traced back to the roll and source of the material and the date of the production.






HANGTAGS:

Each garment shall have a Factory Warranty hangtag, a STEDFAST hangtag, and 3M SCOTCHLITE™ tag. On the back side of the Gerber hangtag there shall be a sticker label with the style name, the ID# and the size of the garment.






GUARANTEE:

Each garment shall be guaranteed to be free from defects and the factory workmanship for five years and shall be evidenced by a hangtag on each garment.






SILENCE ON SPECIFICATION:

The apparent silence of this specification as to any details or the omission from it of a detail description concerning any point shall be interpreted as meaning that only the best commercial practices are to prevail and only materials and workmanship of first quality to be used.






III. MEASUREMENTS




SIZING:

The manufacturer shall be capable of providing all sizes for men and women,

including any special size requirements. The manufacturer shall have a company representative or

authorized dealer available to assist with the fittings of the garments at no additional cost.


SIZE CHART

SIZE FOR WAIST FINISHED WAIST FINISHED HIP

X-SMALL 24-29 34 41

SMALL 29-33 38 45

MEDIUM 33-37 42 49

LARGE 37-41 46 53

X-LARGE 41-45 50 57

XX-LARGE 45-49 54 61

XXX-LARGE 49-53 58 65

XXXX-LARGE 53-57 62 69

TOLERANCES +-1" +-1"
HEMMING LENGTH
REGULAR LONG

28" 32"








ITEM #

DESCRIPTION

MANUFACTURER

MODEL #


26


UNIFORM SPECIFICATIONS

BDU SHIRT



PROPPER


F5452

SPECIFICATIONS AND ESSENTIAL FEATURES

FABRIC:

65% Polyester 35% Cotton Rip stop






COLOR:

Black, Navy






FLY FRONT:

With 4 hidden buttons spaced 4" apart Top Button shows, fly front is top stitched 3/8" single stitch from edge and 2-1/4" in






POCKETS:

2 bellows pockets 5-1/4 wide and 6" deep with flaps 2-1/4 wide 5-1/4 long. There are two hidden buttons and under flaps for closure. The bellows pocket has 1" pleat at bottom and back side the front side is stitched down. Entire pocket is stitched 1/16 single needle.






COLLAR:

Shirt collar 1/4" top stitched






SEAMS:

All seams are lap seam 1/4" double stitch shoulder, arm hole and side seams







SHOULD STRAPS:

6-1/4 long 2" wide at shoulder 1-1/2 wide at collar to button - Buttons are black






SHIRT SLEEVE:

With reinforced elbow 6-1/4" wide x 9" long ¼” double stitch turnover bottom with adjustable flap is 2-1/2 wide to a point 8" long 1/16 single needle stitch. There is 1 button and hole at point. The second button is 4" a way the 3rd button is 2" away.

Bottom - Turn up 3/4" and single needle top stitch.








ITEM #

DESCRIPTION

MANUFACTURER

MODEL #


27


UNIFORM SPECIFICATIONS

BDU TACTICAL TROUSER



PROPPER


F5201

SPECIFICATIONS AND ESSENTIAL FEATURES

FABRIC:

65% Polyester 35% Cotton Ripstop






COLOR:

Black, Navy






POCKETING:

Black





FRONT POCKETS:

2-1/4 Top Pockets with 6-3/4 opening 12" deep






HIP POCKETS:

2 - 6" opening 6-3/4 deep with flaps 2-1/8" wide 1/4" single stitch with 2 hidden buttons sewn under each flap






SIDE POCKETS:

To start 2-1/2 below top pocket bellows pockets

9-3/4" wide at top 9" wide at bottom

9" deep with 3-1" side pleats

Top stitched 1/8" single stitch flaps 2-1/4" wide ¼” single needle top stitch





FLAPS:

Are 9-1/2" long sewn down on front side 2 buttons hidden under flap for closure

Waist Band 1-1/2" turnover band with add clip on side seam ½” from top of band with 1/2" X 5” long tape for adjusting.





7 BELT LOOPS:

1/2" wide x 2-1/2" long drop loops bartacked top and bottom.






KNEE REINFORCMENT:

10" long sewn from side seam to side seam.






SEAMS:

All seams are lap seams 1/4" double stitch






REINFORCE SEAT:

Seat is double fabric sewn 3-1/2" from waist band to crotch and 11" across-the seat 1/8" single stitch.






BOTTOM:

3/4" Turn up with adjustable tape for making trousers loose or tight at bottom









ITEM #

DESCRIPTION

MANUFACTURER

MODEL #


28


PANT BELT




AKER


B08

SPECIFICATIONS AND ESSENTIAL FEATURES

MATERIAL:

9-10 ounce, top gained cowhide (Grade A). The grain side is free from defects – such as cuts, Scratches, heavy wrinkles, and cracked grain. The back side is smooth, free from flesh. All Leather is treated for mold resistance.






HARDWARE:

1 ¾” nickel plated buckle, black solid brass snaps (size #24)






COLOR:

Black





FEATURES:

Two snaps to hold buckle in place with a ½” wide belt keeper installed between the two snaps.







FINISH:

All leather is dyed black. All exposed edges are burnished to ensure the edges are smooth, dyed and polished. The finished belt is treated to provide luster and prevent excessive rub off. The belt has a design crease border approximately 3/16” from the edge of the entire surface of the face side of the belt.









ITEM #

DESCRIPTION

MANUFACTURER

MODEL #


29


T-SHIRT



HANES


5250

SPECIFICATIONS AND ESSENTIAL FEATURES

FABRIC & CONSTRUCTION:

•6.1-ounce, 100% ComfortSoft® cotton (preshrunk)

•Tagless label

•Double-needle coverseamed crewneck

•Lay-flat collar

•Shoulder-to-shoulder taping

•Hanes EasyColor program, haneseasycolor.com





COLOR:

White and navy.









ITEM #

DESCRIPTION

MANUFACTURER

MODEL #


30


OXFORD SHOES


BATES


E0056

SPECIFICATIONS AND ESSENTIAL FEATURES

MATERIAL:

Upper: Smooth Cowhide:

Upper Lining: Cambrelle, two-ply fused nylon on foam.





BOXTOE and COUNTER:

Thermo-plastic






INSOLE:

3 ½” Iron Texon






SHANK:

Fiberglass






INSOLE INSERT:

textex covered polyurethane foam, orthotically designed Dual Axidyne heel and forepoart pads.






WELT:

Goodyear Storm welt.






OUTSOLE:

21 Iron Polyurethane with attached heel






COLOR:

Black Leather Shoe






SIZES:

D 6-12, 13, 14, 15

E 6-12, 13, ,14, 15

EEE 6-12, 13, 14, 15







ITEM #

DESCRIPTION

MANUFACTURER

MODEL #


31


CHUKKA


BATES


E0078



SPECIFICATIONS AND ESSENTIAL FEATURES

MEN’S BLACK LEATHER SIZES:

B 3-9


D 3-12, 13, 14

E 6-12, 13, 14

EEE 6-12, 13, 14








ITEM #

DESCRIPTION

MANUFACTURER

MODEL #

32

QUICK RELEASE 6” PLAIN TOE SAFETY

REDBACK BOOTS

USBBK

SPECIFICATIONS AND ESSENTIAL FEATURES

SPECIFIC WORKPLACE REQUIREMENT:

To provide comfort and protection from entry of foreign matter during extended periods of wear in Station/Rescue and emergency service environments. Features lightweight, insulated and shock absorbing construction for comfort on concrete floors. The footwear is to provide a quick release system to assist ingress and egress of foot while maximizing ankle support.






GENERAL FOOTWEAR DESCRIPTION:

Men’s Ankle height Elastic Side (170mm) high from wear surface to top of boot. All leather upper with external counter support. Sole / insole design incorporates impact absorbing features to reduce heel strike and a wedge profile sole giving greater surface area for stability and traction. Direct injected. Two Density TPU outsole / PU Midsole






MATERIALS:

Leather: Full Grain 1st Grade Cow Hide Full chrome tannage

Colour/Finish: Black Oil Hide

Lining: Breathable anti bacterial Non-woven Safety Lining

Insole: Non Woven with special bacteria resistance

Heel Stiffener: Heavy duty ‘Rhenoflex’ N500N thermoplastic stiffener with woven polymer reinforcing

Footbed: Removable bonded padded innersole with contoured heel cup and arch support for additional support, hygiene and volumetric control.

Toecap: Type 1 Steel Cap To AS/NZS 2210.2 & Australian Defence Standard

(Also meets U.S. ANSI and European EN 344 Standards for Protective Footwear.)

Thread: 20 gauge minimum poly/cotton to AS/NZS 2210.

Sole: Compression Moulded TPU Hydrolysis Resistant Outsole

Direct Injection Air Cushion Polyurethane Midsole

Electrical resistance > 1,500 volts. 200C heat resistance.

High resistance to oils/acids.






DESIGN / MANUFACTURE:

Pull-on loop securely stitched.

Min 2 rows stitching for vamp / upper closure.

No conductive materials to be used in construction






SIZES:

Footwear is available in all of the following sizes.

Sizes: 4 – 12, 13, 14 including half sizes through 12.








ITEM #

DESCRIPTION

MANUFACTURER

MODEL #


33


OXFORD SHOES


THOROGOOD


834-6130

SPECIFICATIONS AND ESSENTIAL FEATURES

MATERIAL

Value Leather: Black, smooth, high shine leather. Soft, breathable pigskin leather quarter and tongue lining.






CONTENT:

Cushion Texon Vikofome insole with extra arch support pad to absorb shock and reduce fatigue. Cushion creape oil-resistant outsole. Storm welt.






SIZES:

B 7-12, 13, 14

C 7-12, 13, 14

D 6-12, 13, 14

E 6-12, 13, 14

EEE 6-12, 13








ITEM #

DESCRIPTION

MANUFACTURER

MODEL #


34


OXFORD SHOES

(WOMEN’S)


THOROGOOD


534-6047

SPECIFICATIONS AND ESSENTIAL FEATURES

MATERIAL

Value Leather: Black, smooth, high shine leather. Soft, breathable pigskin leather quarter and tongue lining.






CONTENT:

Cushion Texon Vikofome insole with extra arch support pad to absorb shock and reduce fatigue. Cushion creape oil-resistant outsole. Strom welt.






SIZES:

Standard


Medium 5 – 11

Wide 5 - 10








ITEM #

DESCRIPTION

MANUFACTURER

MODEL #


35


INSOLE


THOROGOOD


589-7009

SIZES:

S, M, L for Fmale shoe size 5 ½ - 11








ITEM #

DESCRIPTION

MANUFACTURER

MODEL #

IMAGE


36


INSOLE


THOROGOOD


889-3004




SIZES:

S, M, L for Men’s shoe size 7 - 13








ITEM #

DESCRIPTION

MANUFACTURER

MODEL #

37


SAN FRANCISCO FIRE DEPARTMENT

8-INCH STEEL TOED BOOT WITH ZIPPER KIT


RED WING SHOES


4473


SPECIFICATIONS AND ESSENTIAL FEATURES

LEATHER:

Full grain, waterproof Black Star leather






SOLE:

SuperSole welt construction. Oil/Slip resistant mini lug SuperSole. To meet puncture resistance standard as established in of ASTM F 2413-05 requirements.






STEEL TOE:

Tempered steel toe caps that meet ASTM F 2413-05 I/75 C/75 standards for impact and compression.






SIZES:

To be available in the following widths and sizes:

B 9-14

D 4-14


E 8-12

EEE 8-12





ZIPPER KIT: To come complete with Red Wing brand zipper kit, style 96226.







ITEM #

DESCRIPTION

MANUFACTURER

MODEL #


38


SAN FRANCISCO FIRE DEPARTMENT

COMMANDO SWEATER


COBMEX APPAREL


8082

SPECIFICATIONS AND ESSENTIAL FEATURES

DESCRIPTION:

V-Neck Commando Sweater with Velcro Epaulettes. Poly-Cotton Patches on Shoulders &

Elbows. Nameplate & Badgeplate Swift Attached.





CONTENT:

70% Durapil™ Acrylic / 30% Wool






FABRIC TYPE:

2x2 Rib





GAUGE:

7gg





COLORS:

Black (368), Dark Navy (4019)




SIZES:

Unisex sizing from XS to 5XL.









ITEM #

DESCRIPTION

MANUFACTURER

MODEL #


39


CREW-NECK ZIP-FRONT

CARDIGAN SWEATER




COBMEX APPAREL


4011

SPECIFICATIONS AND ESSENTIAL FEATURES

DESCRIPTION:

Crew Neck Zip Front USPS Inspired Cardigan with Seed Stitch Placket and Pockets.

Ribbed Waistband and Cuffs.





CONTENT:

100% Durapil™ Acrylic






FABRIC TYPE:

Jersey Knit






GAUGE:

7gg





COLORS:

Black (368), Dark Navy (4019)






SIZES:

Unisex sizing XS-6XL.









ITEM #

DESCRIPTION

MANUFACTURER

MODEL #


40


V-NECK BUTTON-FRONT

CARDIGAN SWEATER


COBMEX APPAREL


4018HW

SPECIFICATIONS AND ESSENTIAL FEATURES

DESCRIPTION:

V-Neck Long Sleeve Button Front Cardigan with 2 Pockets, Tubular Waistband and Cuffs.






CONTENT:

100% Durapil ™Acrylic






FABRIC TYPE:

Jersey Knit






GAUGE:

7 gg





COLORS:

Black (368), Navy (468)






SIZES:

Unisex sizing XS to 7XL









ITEM #

DESCRIPTION

MANUFACTURER

MODEL #


41


TOPPS SQUAD

SUIT®



TOPPS


SQUAD

SUIT®


SPECIFICATIONS AND ESSENTIAL FEATURES

DESIGN:

One-piece, bi-swing pleated back with two-way zipper front closure. Elasticized waist in back with hook and loop closure belt in front. Knee-length leg zippers with adjustable snap closure at bottom of leg. Knees to be reinforced on outside by using extra piece of self fabric. Piece to measure approximately 8" by 10". There shall be two pass-through side openings for access to inner garments. The minimum opening shall be 6".






FABRIC:

SQUAD CLOTH™ 65% polyester/35% combed cotton in a poplin weave. 6.5 oz. per square yard. Precured, permanent press finish for longer shape retention and wrinkle resistance.






POCKETS:

There shall be two slanted breast pockets with zipper closures. Pockets to measure approximately 7 wide by 7 1/2" at the deepest point. Bottom of pockets to be sewn into waistband. Pencil pocket incorporated in left pocket. Two inserted lower front pockets of permanent press 65% polyester/35% cotton twill material. The pockets shall have a minimum opening of 6 1/2” and shall be 10 1/2" deep from the top of the opening. A watch/change pocket approximately 3” wide by 3” deep in right front pocket. The two back patch pockets shall have a minimum opening of 7” and shall be 8" deep. The left back pocket to have a zipper closure. A utility pocket shall be attached to the right leg approximately 9" below the waistband. Pocket to measure approximately 3 ½” wide by 11" deep.






SLEEVES:

Sleeves shall have an adjustable cuff with brass nickel plated snaps. Cuff to be 2-ply with the under cuff the same fabric as the top cuff.






COLLAR:

2-ply with the under collar to be the same fabric as the top collar. Sewn-in collar stays. To be topstitched.






BADGE TAB:

A badge tab is included with each SQUAD SUIT® and can be attached wherever needed. The tab will finish approximately 1" wide by 2" long. Two sewn eyelets shall be centered on the badge tab 1" apart.






ZIPPER:

Full length, #5 heavy-duty two-way brass oxidized zipper with permanent press tape and a full length protective fly over zipper. A brass nickel plated snap closure to be at the top of the zipper.






TBKEAD:

The SQUAD SUIT® shall be sewn throughout with polyester blended thread. All closing operations shall be with five thread safety stitching.






SIZE TAGS:

The SQUAD SUIT® shall have a permanent label giving washing instructions, lot number, size, fiber content and RN dumber. Label must state "Made in USA".






FINISHING:

The SQUAD SUIT® shall be made in a first class workmanship manner. All strain points shall be bartacked for extra strength.









Page of




Share with your friends:
1   ...   4   5   6   7   8   9   10   11   12


The database is protected by copyright ©dentisty.org 2019
send message

    Main page