Robert Baier



Download 354.7 Kb.
Page2/7
Date conversion05.12.2016
Size354.7 Kb.
1   2   3   4   5   6   7

Research:
Graduate Thesis Direction
Completed:
"Adhesion of Ehrlich Ascites Tumor Cells to Surface-Modified Glass", James F. Wilkins, Ph.D., Department of Biophysics, State University of New York at Buffalo, February 1974. Current Position: Emeritus, Bioengineering Section, National Institutes of Health, Bethesda, MD
"Divalent Cation Interactions with Phosphatidylserine Vesicles: Evidence for the Formation of a "Trans" Intermembrane Complex Specific for Calcium," Carolyn R. Newton, Ph.D., Department of Biophysics, State University of New York at Buffalo, September 1978. Current Position: Academic V.P. and Provost, Berea College, Berea, KY.
“Correlation of Surface Electrical Properties with Initial Events in Bioadhesion”, Vito A. DePalma, Ph.D., Department of Biophysics, State University of New York at Buffalo, February 1976. Current Position: Retired/Senior Research Scientist, Eastman Kodak Company, Rochester, NY
“A Study of Radiofrequency Glow Discharge Treatment as a Possible Sterilization Technique for Dental Operative Instruments”, Brian Donald McGowan, M.S., Department of Dental Materials, School of Dentistry, State University of New York at Buffalo, July 1979. Current Position: Independent Distributor, Health Care Products, Western New York
“Studies of Mercury Porosimetry: Contact Angle and Roughness Factor,” N.J. Desai, M.S., Department of Chemical Engineering, State University of New York at Buffalo, January 1980. Current Position: unknown
“Biophysical Models of Acquired Pellicle Formation on Substrata of Varying Surface Energy”, Mark Steven Fornalik, M.S., Department of Biophysics, State University of New York at Buffalo, May 1982. Current Position: Analytical Technology Division, Eastman Kodak Company, Rochester, NY
“A Theoretical and Experimental Survey of Ellipsometry as a Refractive Index Measuring Technique,” Steven D. Cheung, M.S., Department of Chemical Engineering, State University of New York at Buffalo, August 1985. Current Position: Senior Engineer, Praxair, Tonawanda, NY
“Correlation of Biophysical Surface Characteristics with Hydrodynamic Properties of Adhesive Biofilms”, Hermann Gucinski, Ph.D., Department of Biophysics, State University of New York at Buffalo, December 1985. Current Position: Retired Program Director/Consultant, U.S.D.A. Forest Service.
“Evaluation of the Role of Direct Pressure Influence on Pressure Sore Formation: Measurement of Heel-Surface Interface Pressure During Spot Flotation”, Beverly M. Steele, D.N.Sc., Rush University, Chicago, IL, May 1988. Current Position: Research Director, Department of Nursing, Andrews University, Hinsdale, IL
“Characterization of the Surface Properties of Three Gorgonian Coral Species: Their Potential Role in the Prevention of Biofouling”, Nicholas H. Vrolijk, M.S., College of Marine Studies, University of Delaware, Lewis, DE, June 1988. Current Position: Scientist, DuPont Station, Wilmington, DE
“Role of Metal Interface Properties in Bioadhesive Success”, George Grobe III, Ph.D., Department of Biophysics, State University of New York at Buffalo, September 1989. Current Position: Director, New Technology Exploration; DePuy, Inc., Warsaw, IN
“Physical Strength and Surface Chemistry of Radiation-Treated Suture Materials”, Gary R. Palmer, M.S., Department of Biophysics, State University of New York at Buffalo, February 1990. Current Position: Scientist, (steel industry), Salt Lake City, UT
“Influence of Intraosseous Fluid on the Structural Characteristics of the Femoral Head,” Peter E. Stegemann, M.S., Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo, May 1990. Current Position: Smith & Nephew, Inc., medical devices engineering/sales
“Influence of Substratum Surface Properties on Cell Attachment and Growth”, Philip G. Mondi, M.S., Natural Sciences Program, State University of New York at Buffalo, September 1990. Current Position: M.D., Upstate Medical Center, State University of New York, Syracuse, NY
“Radiofrequency Glow Discharge Treatment of Enamel for the Bonding of Orthodontic Brackets”, Martin J. Wisniewski, D.D.S., M.S., Faculty of the Graduate School of the State University of New York at Buffalo, September 1990. Current Position: private practice, New York City area
"The Wetting of Treated Polymer Surfaces", Hung-chang Chiu, M.S., Dept. Chemical Engineering, State University of New York at Buffalo, 1991. Current Position: unknown.
“Mechanical Properties of the Bone/Titanium Interface with Implants of Various Surface Treatments in vivo”, Mark J. Stachowski, M.S., Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo, February 1991. Current Position: Director, Wound Healing Research, Ethicon Corporation, Division of Johson&Johnson, Inc., Somerville, NJ.
“Influence of Surface Chemical Factors on Selective Cellular Retention”, Karen H. Rittle, Ph.D., Department of Biophysics, State University of New York at Buffalo, May 1991. Current Position: Clinical Research Specialist, 3M Health Care, St. Paul, MN
“Relative Corrosion Susceptibility of a Cobalt-Chromium-Molybdenum Alloy Exposed to Different Surface Treatments”, Essam K. Taha, B.D.S., H.D.D., M.S., Oral Sciences Program, State University of New York at Buffalo, May 1991. Current Position: D.M.D. endodontic specialty practice in Philadelphia, PA
“On Salivary Film Formation and Bacterial Retention to Solids”, Cecilia E. Christersson, Ph.D., Department of Prosthetic Dentistry, Faculty of Odontology, Lund University, Malmo, Sweden, May 1991. Current Position: Clinical Faculty, Faculty of Odontology, Malmo University
“Development of Methodologies to Directly Characterize Calcium Phosphate Deposition Upon Various Biomaterial Substrata”, James G. Hanlon, M.S., Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo, September 1991. Current Position: Senior Scientist, Cardiomend Corp., Santa Barbara, CA
“Corrosion Behavior of Commercially Pure Titanium and Ti-6Al-4V Alloy as Modified by Steam Autoclave and RFGD Treatment”, Eduardo Vargas, D.D.S., M.S., Oral Sciences Program, State University of New York at Buffalo, September 1991. Current Position: prosthodontic specialty practice in Bowie, MD
“Surface Characterization of Selected Bioadhesives”, Marion Pace Olivieri, Ph.D., Department of Biophysics, State University of New York at Buffalo, December 1991. Current Position: Professor and Chair, Math & Natural Sciences Dept., D’Youville College, Buffalo, NY
“Fabrication and Characterization of Selected Mechanical and Surface Properties of a Novel Tissue-Polymer Composite, “ Michael J. Hayes, M.S., Department of Chemical Engineering, State University of New York at Buffalo, May 1992. Current Position: Environmental Engineer, Raytheon Corporation, Somerset, NY
“Control of Infection by Candida albicans in Dentures Constructed of Different Materials,” Vichet Chindanavig, D.D.S., M.S., Faculty of the Graduate School of the State University of New York at Buffalo, February 1992. Current Position: Faculty of Dentistry, Chulalonghorn University, Bangkok, Thailand
“Comparative Measurements of Interfacial Pressures Between Tissue Sites and Various Support Systems,” Laura E. Edsberg, M.S., Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo, September 1992. Current Position: Faculty Member, Daemen College, Amherst, NY
“Conformational Analysis of a Salivary Proline-Rich Glycoprotein Peptide Domain,” Mireya Gonzalez, D.D.S., M.O., M.S., Oral Sciences Program, State University of New York at Buffalo, September 1992. Current Position: Faculty Member, University in Mexico City
“CAD/CAM Generated Mandibular Model Prototype from MRI Data,” Sean C. Huckins, M.S., Natural Sciences Program, State University of New York at Buffalo, September 1992. Current Position: Sr. Research Associate, Dept. Neurosurgery, Upstate Medical University, Syracuse, NY
“Phase Separated Domains in Phospholipid Monolayers,” Hao Yu, Ph.D., Department of Biophysics, State University of New York at Buffalo, September 1992. Current Position: Center for Biomolecular Engineering, U.S. Naval Research Laboratory, Washington, DC
“Stability of Hydroxyapatite-Coated Dental Implants Surface-Treated by a Glow-Discharge Process,” James P. Malone, M.S., Oral Sciences Program, State University of New York at Buffalo, February 1993. Current Position: Postdoctoral Fellow, Department of Oral Biology, University at Buffalo.
“A Dissolution Study of Human Dentin In-Vitro,” Usama Nassar, D.D.S., M.S., Oral Sciences Program, State University of New York at Buffalo, February 1993. Current Position: Combined Prosthodontics, School of Dental Medicine, University of Manitoba, Canada
“Mineralization of Protein Films,” Achilles Tsortos, Ph.D., Department of Biophysical Sciences, State University of New York at Buffalo, May 1993. Current Position: unknown
“Histochemical Preparation and Measurement of Human Iliac Crest Biopsies,” Kenneth Mekelburg, M.S., Natural Sciences Program, State University of New York at Buffalo, September 1993. Current Position: M.D., St. George University School of Medicine, Grenada, West Indies
“Reliability of Correlation Dimension in Repetitive Biting,” Roland G. Nentwich, D.D.S., M.S., Oral Sciences Program, State University of New York at Buffalo, September 1993. Current Position: private practice
“Physicochemical Studies of Biologically Important Calcium Phosphates,” Eleftherios Paschalis, Ph.D., Department of Biophysical Sciences, State University of New York at Buffalo, September 1993. Current Position: Research Associate, New York University
“Development and Calibration of an Approach for Quantification of Surface Topography,” Cheryl A. Morgan, D.M.D., M.S., Oral Sciences Program, State University of New York at Buffalo, September 1993. Current Position: Commander, U.S. Navy Dental Corps.
“Effectiveness of Glow Discharge (Picotron) for Inactivating Poliovirus and Herpes Simplex Virus Type I,” Mei Hui Lin, M.S., Department of Medical Technology, State University of New York at Buffalo, September 1993. Current Position: Ph.D., Medical Technology.
“Surface Preparation Influences on Composite Resin Bonding,” Patrick J. McCabe, M.S., Department of Biomaterials, State University of New York at Buffalo, September 1993. Current Position: Research Metallurgist, Ivoclar Vivadent, Inc., Amherst, NY
“Physicochemical Changes in Articular Cartilage of Osteoarthritic Human Knee,” Daniel R. Schlatterer, M.S., Natural Sciences Program, Roswell Park Division of the Graduate School, State University of New York at Buffalo, December 1993. Current Position: Orthopaedics Practice (D.O.), Buffalo, NY
“Analysis of the Cellular Healing Response of the Chick Chorioallantoic Membrane to Implanted Poly(Glycolic Acid),” [Ph.D.] Laurie Carter, D.D.S., M.A., Ph.D., Department of Experimental Pathology, State University of New York at Buffalo, December 1993. Current Position: Professor and Graduate Studies Director, Department of Oral Radiology & Pathology, Virginia Commonwealth University, Richmond, VA
“Microstructural Evaluation of Human Epidermal Tissue Subjected to Static Versus Cyclic Normal Pressures,” Laura E. Edsberg, Ph.D., Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo, May 1994. Current Position: Faculty Member, Daemen College, Amherst, NY
“Friction and Wear Testing of Rigid Gas-Permeable and New Hydrogel Materials for Contact Lenses in Various Lubricants,” Claudine M. Hamlin, M.S., Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo, May 1994. Current Position: Evaluator, Office of Device Evaluation, U.S. Food and Drug Administration, Rockville, MD
“Differential Bone Growth Around Commercially Pure Titanium Implants in Rat Femora, as a Function of Prior Implant Anodization or Glow Discharge Treatment,” Scott Severance, M.S., Natural Sciences Program, Roswell Park Division of the Graduate School, State University of New York at Buffalo, September 1994. Current Position: Ph.D. Student, Biochemistry, SUNY Buffalo
“Effect of PEG-Lipid on Protein Adsorption and Cell Adhesion to the Surface of Lipid Bilayer,” Hong Du, M.S., Department of Biophysics, Roswell Park Division of the Graduate School, State University of New York at Buffalo, September 1994. Current Position: Ph.D., Student, Tulane University, New Orleans, LA
“Influence of Laser Treatment on Permeability of Dentin,” Mohammed Fayed, D.D.S., M.S., Oral Sciences Program, State University of New York at Buffalo, December 1994. Current Position: Faculty, Eastman Dental Center, University of Rochester
"Effect of Plasma Treatment, Surface Roughness and Heat Activation on Polymers and Pyrolytic Carbon", Chiuman Yeung, M.S., State University of New York at Buffalo, 1995. Current Position: Ph.D. Candidate, University of Illinois.
"The Cutting Efficiency of Endodontic Files", Billy Don Card, Jr., D.D.S., M.S., Oral Sciences Program, State University of New York at Buffalo, 1995. Current Position: Clinician, Public Health Service, North Dakota.
"Dynamically Induced Mineralization of Bioprosthetic Tissue", Jeffrey Austin White, M.S., Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo, 1996. Current Position: Research Associate, Pediatric Cardiology, University of Miami.
"The Kinetics of Mineralization and Demineralization of Biologically Relevant Calcium Phosphates", Brian E. Tucker, Ph.D., Department of Chemistry, State University of New York at Buffalo, 1996. Current Position: IBM, Binghamton, NY
"Evaluation of Specimen Preparation Methods for Calcium Phosphate Deposits on Biomaterials", Ryan T. Batte, D.D.S., M.S., Biomaterials Graduate Program, State University of New York at Buffalo, 1996. Current Position: private practice in Hornell, NY.
"Design of a National Implantable Device Registry", Aaron Taylor, M.S., Dept. Mechanical and Aerospace Engineering, State University of New York at Buffalo, 1996. Current Position: Chief Executive Officer, LanTrax, Inc., Amherst, NY.
"Spectroscopic Investigation of Allosteric Changes in Substratum-Bound Hemoglobin," Fred Douglas Archer III, M.S., Natural Sciences Program, Roswell Park Division of State University of New York at Buffalo, 1997. Current Position: M.D., Pediatrics, Women and Childrens' Hospital, Buffalo, NY
"The Effect of Gravity on Fluid Configuration and Contact Angle Hysteresis", Michael R. Sasges, Ph.D., Dept. Mechanical and Industrial Engineering, University of Toronto, 1997. Current Position: Senior Engineer, Trojan Technologies, London, Ontario.
"Evaluation of a Surface Chemical Approach to Improved Preparation of Root Canal Systems", Maneesh Sharma, D.D.S., M.S., Oral Sciences Program, State University of New York at Buffalo, 1997. Current Position: Private Practice, Ottawa, Ontario.
"Monitoring Endodontically-Related Changes Utilizing Quantitative Digital Subtraction Radiography", Paul M. Kaplan, D.M.D., M.S., Oral Sciences Program, State University of New York at Buffalo, 1997. Current Position: Private Practice, Connecticut.
"Use of Nuclear Magnetic Resonance to Characterize Liquids Structured from Various Liquid-Solid Interfaces", Vittoria Fruci, M.S., Department of Biophysics, Roswell Park Division of State University of New York at Buffalo, 1997. Current Position: unknown.
"Ultrasonic Augmentation of Chlorhexidine Substantivity to Surface Characterized Dense Hydroxyapatite", Marilyn Goulding, R.D.H., M.S., Oral Sciences Program, State University of New York at Buffalo, 1998. Current Position: Faculty Member, Dental Hygiene Program, Canada.
"An In-Vitro Study of the Kinetics of Heterotype Neutrophil-Platelet Adhesion Under Hydrodynamic Shear", Lenh Mong, M.E., Dept. Chemical Engineering, State University of New York at Buffalo, 1998. Current Position: Engineer (biomedical industry), New Jersey.
"Investigation of Possible Mechanisms for Inherent Drag Reduction by Biofouling-Release Coatings", Mark S. Ricotta, M.S., Dept. Mechanical and Aerospace Engineering, State University of New York at Buffalo, 1998. Current Position: Engineer, Medtronic, Tempe, AZ
"Orthodontics and Contact Surface Phenomena: An Investigation of Frictional Orthodontic Sliding Forces Using Surface Characterized Brackets and Archwires", Aaron S. Gilman, M.S., Dept. Physiology and Biophysics, State University of New York at Buffalo , 1998. Current Position: Has since received D.D.S. degree and currently is an advanced clinical student in Orthodontics, University of Illinois.
"Surface Property Modification via Surface Active Displacement Solutions to Improve Semi-Volatile Organic and High Molecular Weight Compound Bioremediation", Brian M. Trapp, M.E., Dept. Chemical Engineering, State University of New York at Buffalo, 1999. Current Position: Quality Control Engineer, IBM Corporation, Fishkill, NY.
"Spatial and Temporal Variability of Organic and Nutrient Compounds in Atmospheric Media Collected During the Lake Michigan Mass Balance Study", Sondra M. Miller, M.S., Dept. Civil, Structural, and Environmental Engineering, State University of New York at Buffalo, 1999. Current Position: Has since received Ph.D. (Univ. Iowa) and currently is Assistant Professor, Dept. Civil Engineering, Boise State University.
"Development of an In-vitro Capillary Angiogenesis Model with Characterization of the Cellular Elements and Cytokine Production", Sherry A. Bradford-Mangione, Ph.D., Department of Biochemistry, Roswell Park Division of State University of New York at Buffalo, 2000. Current Position: Chief Scientific Officer, Oncology Research Therapeutics, Inc., Amherst, NY
"Study of the Surface Free Energy of Polymers for Cell Growth and Adhesion", Chun-Hung Yu, Ph.D., Department of Chemical Engineering, State University of New York at Buffalo, 2000. Current Position: Computer Consultant, Rochester, NY
"Differential Influences of Small Particles and Surface-Modified Polystyrene Substrata on the Shapes and Reactivities of Human Monocytes", Eric A. Axelson, M.S., Biomaterials Graduate Programs, State University of New York at Buffalo, 2000. Current Position: Research Technician, Great Lakes Orthodontics, Tonawanda, NY.
"Design and Evaluation of a Thin Film Bio-Sensor”, Lucas J. Latini, M.S., Biomaterials Graduate Program, State University of New York at Buffalo, 2000. Current Position: Quality Engineer/Validation and Special Projects, Synthes USA, Horseheads, NY.
"Surface Features Affecting Performance of Temporomandibular Joint Articulations", Bhavani Venkatachalam, B.D.S., M.S., D.D.S., Biomaterials Graduate Program, State University of New York at Buffalo, 2001. Current Position: Dept. Prosthodontics, New York University, New York, NY
"Glow Discharge Treatment Contributions to Porcelain Bond Integrity Over New Metal Substructures (Captek) for Porcelain-Fused-Metal Crowns", Hyeong Il Kim, D.D.S., M.S., Oral Sciences Program, State University of New York at Buffalo, 2002. Current Position: Clinical Instructor, State University of New York at Buffalo.
"Surface-Modified Polyurethanes: Oxidative Influences on Interfacial Properties", Aravind Sampath, B.D.S., M.S., Biomaterials Graduate Program, State University of New York at Buffalo, 2002. Current Position: Clinical Instructor, India.
“Piezoresistivity and Piezoelectricity of Carbon Fiber Thermoplastic-Matrix Composites”, Victor, H. Guerrero, M.S., Dept. Mechanical and Aerospace Engineering, State University of New York at Buffalo, 2002. Current Position: Ph.D. student, Mechanical Engineering, University at Buffalo.
"Evaluation of Resin-Dentin Bonding: The Role of Resin Penetration Through the Dentin Adhesive Layer", Tammy T. Bonstein, D.M.D., M.S., Biomaterials Graduate Program, State University of New York at Buffalo, 2003. Current Position: Faculty, University of Manitoba, Winnipeg, Ontario, Canada.
"Inter-Laminar Mechanisms of a New Metal Substructure System (Captek) for Porcelain-Fused-to-Metal Crowns", Panagiotis C. Psichogios, D.D.S., M.S., Oral Sciences Program, State University of New York at Buffalo, 2003. Current Position: Clinical Faculty, Ohio State University, Columbus, OH.
"Surface Characterization of Naturally Formed Ballast Biofilms and Distributions of "Benchmark" Bacteria", Robert L. Forsberg, M.S., Biomaterials Graduate Program, State University of New York at Buffalo, 2003. Current Position: Quality Control Scientist, Washington Mills Corporation, Niagara Falls, NY.
"Influence of the Mode of Sterilization on Surface Reactivity of Glass-Ceramic Tissue Engineering Scaffolds", Ahmad A. Ekrouf, D.D.S., M.S., Biomaterials Graduate Program, State University of New York at Buffalo, 2003. Current Position: Private Practice and Clinical Faculty (Periodontics), Kuwait City, Kuwait.
"Surface Properties of Radiation Sterilized UHMW Polyethylene Articulations with Cobalt-Chromium Alloys", Shrirang P. Mahajan, B.D.S., M.S., Biomaterials Graduate Program, State University of New York at Buffalo, 2003. Current Position: Private Practice and Clinical Faculty, Minneapolis, MN.
“Surface Features Affecting Color Stability of Dental Composite Restorations”, Alfonso Monarres, D.D.S., M.S. Biomaterials Graduate Program, State University of New York at Buffalo, 2004. Current Position: Private Practice and Clinical Faculty, University of Texas Health Science Center at San Antonio.
“’Optical Tweezer’ Studies of Shear Resistance of Microscopic Particles Attached to Characterized Surfaces: Implications for Self-Cleaning Biomaterials”, Prashant S. Nagathan, M.S., Dept. Mechanical and Aerospace Engineering, State University of New York at Buffalo, 2004. Current Position: Mechanical Engineer, Sigma International, Medina, NY.
“Modified Design of Temporomandibular Joint Prostheses with the Use of Finite Element Analysis (FEA)”, Tamer S. Elsamahy, M.S., Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo, 2004. Current Position: Medical Engineer, AccuMED Technologies, Inc., Buffalo, NY 14206
“Evanescent Wave Sensing of Biological Substances: Prismatic Waveguide versus Circular Cross-Section Optical Fiber Comparisons”, Carrie Ann Buckley, M.S., Biomaterials Graduate Program, State University of New York at Buffalo, 2004. Current Position: Manager of Component Testing, Oneida Research Services (www.ors-labs.com) , Whitesboro, NY
“Surface Analysis of Airborne Particulates from Central Iraq and the Pathophysiology of Lung Remodeling”, Joseph A. DeGeorge, M.A., Department of Biological Sciences, State University of New York at Buffalo, 2005. Current Position: PhD studies, Graduate Program in Pathology, State University of New York at Buffalo, NY.
“Trans-interfacial Curing of Layered Composites, Siddarth Mehta, B.D.S., M.S., Biomaterials Graduate Program, State University of New York at Buffalo, 2005. Current Position: Clinical Practice, Yakima Hospital, Washington.
“Evaluation of Surface-Activity-Enhanced Disinfectants and Solutions in Fiberglass-filled Narrow Lumens”, Michael J. DuVal, M.S., Biomaterials Graduate Program, State University of New York at Buffalo, 2005. Current Position: Senior Engineer, Ascension Industries, North Tonawanda, NY
“Convergence of Biological Response Mechanisms for Micro- and Nanoparticulate Matter Instilled into Rat Lungs”, Mallika R. Chary, B.D.S., M.S., Biomaterials Graduate Program, State University of New York at Buffalo, 2005. Current Position: Ph.D. student, Dept. Immunology, Roswell Park Cancer Institute, University at Buffalo.
“Customization of Contact Lenses for In-the-Eye Medication”, James M. Fick, M.S., Biomaterials Graduate Program, State University of New York at Buffalo, 2005. Current Position: Ph.D. awarded for Dissertation “Response of Articular Cartilage to Compression: An Investigation in Relation to Matrix Health”, Dept. Chemical & Materials Engineering, University of Auckland, New Zealand, 2011.
“Examination of Copper- vs. Polyphenolic-Based Mechanisms for Areca Nut Extract Crosslinking of Submucosa in vitro”, Saravana K. Karunagaran, B.D.S., M.S., Biomaterials Graduate Program, State University of New York at Buffalo, 2005. Current Position: Clinical Staff, Yakima Hospital, Washington.
“Antifungal Activity of Salivary Mucin-Derived Peptide, MUC7 12-mer, in an in-vivo Murine Model of Oral Candidiasis”, Ranjani Muralidharan, B.D.S., M.S., Biomaterials Graduate Program, State University of New York at Buffalo, 2005. Current Position: Research Associate, National Institute of Dental and Craniofacial Research, National Institutes of Health, Bethesda, MD.
“Radiographic Evaluation of Root Resorption Geometries Associated with Biodegradable Polymer Obturants in-vitro”, Brindha K. Subramanian, B.D.S., M.S., Biomaterials Graduate Program, State University of New York at Buffalo, 2005. Current Position: Advanced clinical training in pedodontics, Louisiana State University.
“Mechanical Compliance and Magnetic Resonance Imaging Test Models for Prosthetic Spinal Disc Hydrogels”, Ediuska Laurens, B.S., Department of Mechanical & Aerospace Engineering, State University of New York at Buffalo (M.S.), 2005. Current Position: (Ph.D.) Bioengineering Project Leader, Stryker Corporation, Memphis, TN.
“Infrared Microscopic Monitoring of Microfouling of Germanium Substrata”, Saurabh Mittra, B.S., Mechanical & Aerospace Engineering, State University of New York at Buffalo (M.S.), 2006. Current Position: Engineering Manager, Pepsi Cola Corporation, Massachusetts
“Effect of Glow-Discharge Treatment on the Shear Bond Strength of Glass-Fiber-Reinforced Root Canal Posts Bonded to Composite”, Sheela Shrestha, B.D.S., Biomaterials Graduate Program, State University of New York at Buffalo (M.S.), 2006. Current Position: Clinical Research, Yakima, Washington.
“Influence of the Posterior Cruciate Ligament in Total Knee Replacement”, Deepthi Talla, B.S., Department of Mechanical & Aerospace Engineering, State University of New York at Buffalo (M.S.), 2006. Current Position: Orthopedics Engineer, Smith & Nephew Corp., Memphis, TN.
“Pressable Glass-Ceramic as a Repair Material for Porcelain Fracture, Tariq S. Abuhaimed, B.D.S., Biomaterials Graduate Program, State University of New York at Buffalo (M.S.), 2006. Current Position: Ph.D. candidate, Department of Mechanical and Aerospace Engineering, and Advanced Certificate Program in Endodontics, State University of New York at Buffalo.
“Mathematical Model of Respiratory Function”, Andrea McClain, Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo, 2006. Current Position: Product Development Engineer, Harmac Medical Products, Buffalo, NY.
”In Vitro Measurement of Tool-Artery Interaction Forces During Endovascular Neuro-Surgery Using Silicone Phantoms”, Anindita Sengupta, Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo, M.S., 2007. Current Position: Research Engineer, AGA Medical, Plymouth, MN.
“Tailpipe Vs Windpipe: A Study of In-Bus Ultrafine Particulate Matter”, Sanketh Guruswamy, Technology Department, Buffalo State College, MS, 2007. Current Position: Sales Engineer, Chicago, IL.
“Study of Endovascular Devices: Guidewires and Balloon Catheters”, Abha (Gupta) Raveau Violette, Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo, M.S., 2007. Current Position: Research Engineer, B. Braun Medical, Chasseneuil, France.
“Design and Evaluation of Endovascular Devices: Applications for Cerebral Aneurysm”, Hussain Soaeb Rangwala, Ph.D., Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo, 2007. Current Position: R&D Engineer, ev3 Corporation, Peripheral Vascular Division, Plymouth, MN.
“The Role of NADPH Oxidase in Zymosan-Induced Inflammation”, Joy Feminella, B.A., Natural Sciences Program, Roswell Park Division of the Graduate School, State University of New York at Buffalo (M.S.), 2007. Current Position: Cancer Research Associate, Richmond, VA.
“Interaction of Surface Energy and Microarchitecture in Determining Cell and Tissue Response to Biomaterials”, Ge Zhao, Ph.D., Department of Biomedical Engineering, Georgia Institute of Technology, 2008. Current Position: Post-Doctoral Associate, University of Washington, Seattle, WA.
“High-Speed Microfluidic Thermal Simulator for Temperature-Activated Ion Channel Studies”, Thomas Pennell II, Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo, (M.S.), 2008. Current Position: Microelectronics Engineer, Ithaca, NY.
“Modified Bacterial Retention to Toothbrush Nylon with Combined Easy-Release and Photocatalytic Surface Treatments”,. Swati S. Dabade, B.D.S., Biomaterials Graduate Program, State University of New York at Buffalo (M.S.), 2008. Current Position: Optional Practical Training Applicant
“Flow-induced Modifications of Cultured Bovine Aortic Endothelial Cells Attached to Glass”, Eleni Metaxa, Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo (Ph.D.), 2008. Current Position: Postdoctoral Research, Toshiba Stroke Research Center
“An Ex Vivo System to Study Hemodynamic Initiated Vascular Remodeling in Arterial Bifurcations”, Dayle Q. Hodge, Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo (M.S.), 2008. Current Position: Design Engineer (orthopedic spinal implants and minimally invasive surgery), NuVasive Inc., San Diego, California; accepted for July 2010 start of NIH-sponsored Medical Scientist Training Program (MD/PhD) at Albert Einstein College of Medicine, New York
“Comparison of Cell Proliferation and Maturation of Osteoblastic Cells from a Cancer Patient Treated with Bisphosphonates and Normal Osteoblastic Cells on Three Different Biomaterials”, .Jinsuk Lee, Graduate Program in Oral Sciences, State University of New York at Buffalo, (M.S.), 2008. Current Position: Research Associate, University of Hawaii
“Noninvasive Laser Doppler Monitoring of Compliance-Related Intimal Wall Disturbed Flow in Blood Vessel Grafts,” Chih-Hao Chang, Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo (M.S.), 2008. Current Position: Ph.D. Candidate, Toshiba Stroke Research Center, Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo
“Infrared Spectroscopic Analysis of Restorative Composite Materials Surfaces and Their Saline Extracts,” Reem A. Ajaj, Biomaterials Graduate Program, State University of New York at Buffalo (M.S.), 2009. Current Position: Advanced Clinical Studies and PhD Program, University of California at Los Angeles
“Bioadhesion and Strength of Attachment of Neurons to Biomaterials, Pyrolytic Carbon and Commercially Pure Titanium, Subjected to Radio Frequency Glow Discharge and Autoclave Sterilization,” Mark Szymanski, Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo (M.S.), 2009. Current Position: Senior Engineer, Wright Medical Corporation, Memphis, Tennessee
“An In Vitro Flow System to Study the Endothelial Cell Response to Positive and Negative Wall Shear Stress Gradients”, Sukhjinder Singh, Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo (M.S.), 2009. Current Position: Optional Practical Training Candidate
“Lubricating Biologic Surfaces with Hydroxypropyl Guar and Hyaluronic Acid”, Lindsay Rodgers, Biomaterials Graduate Program, State University of New York at Buffalo (M.S.), 2010. Current Position: PhD Candidate, Bioengineering, Cornell University, Ithaca, NY
“Effect of Radio Frequency Glow Discharge Treatment on Resorption of Poly-L-Lactide to be Used as Intra-Bony Space Maintainer”, Chaitanya Prakash Puranik, Biomaterials Graduate Program, State University of New York at Buffalo, (M.S.), 2010. Current Position: PhD Candidate, Oral Biology Program, University of North Carolina
“Improvement of Root Canal X-Ray Imaging by Delmopinol Pretreatment-Assisted Contrast Media Infiltration”, Satyaprasad C. Nayak, Biomaterials Graduate Program, State University of New York at Buffalo, (M.S.), 2010. Current Position: International Dentist Program, University of Pennsylvania
“Evaluation of Transparent Low-Critical-Surface-Tension Coatings for Potential Easy-Release of Fouling from Quartz Surfaces of Germicidal Ultraviolet Water Purifiers”, Katherine E. Ayling, Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo, (M.S.), 2010: Current Position: Biomechanical Research Laboratory Manager, Boston University
“Endothelial Cell Apoptosis in High Wall Shear Stress and Wall Shear Stress Gradient Environments”, Shashikanth R. Kaluvala, Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo, (M.S.), 2010. Current Position: Research Associate, Toshiba Stroke Center, SUNY Buffalo
“Tissue-on-Tissue Lubricity Studies of Saliva Substitutes As-Supplied, Mixed With, and Compared With Human Saliva From Control and Xerostomia Patients”, Rashmi Ganesh, Biomaterials Graduate Program, State University of New York at Buffalo, (M.S.), 2010. Current Position: Periodontics Advanced Certificate Program, New Jersey University of Medicine and Dentistry
“Design, Fabrication and Usage of Self-Expanding Asymmetric Stents (SAVS)”, Himanshu Suri, Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo, (M.S.), 2010. Current Position: PhD Candidate, Toshiba Stroke Research Center, State University of New York at Buffalo
“Enhanced Tissue Integration of Implantable Electrodes for Sensing, and Stimulation, via Radio Frequency Glow Discharge”, Laurie M. O’Connor (MS), Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo, (Ph.D.), 2010. Current Position: Engineer, Greatbatch Medical, Inc., Clarence, NY
“Image Based CFD Analysis of Intracranial Aneurysms”, Madhu Vellakal, Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo (M.S.) 2010. Current Position: Computational Fluid Dynamics Engineer, Eicher Engineering Solutions, Detroit, MI
“Lubricated Tissue-Friction Modification from Peroxide-based Tooth ‘Whitening’ Treatment of As-Prepared vs Saline-Extracted Composite Restorative Materials”, Todd M. Penman, Biomaterials Graduate Program, State University of New York at Buffalo, (M.S.), 2010. Current Position: Dental School Applicant
“Cathodic Current Enhancement via Manganese and Oxygen Related Reactions in Marine Biofilms”, Matthew James Strom, University of Delaware, (Ph.D.), 2010. Current Position: PostDoctoral Research Fellow, US Naval Research Laboratory, Washington, DC.
“Photodynamic Therapy as Alternative Treatment for Disinfection on Bacteria in Oral Biofilms”, Dharam Pal Tayal, Biomaterials Graduate Program, State University of New York at Buffalo, (M.S.) 2011. Current Position: International Dentist Program, New York University, New York City
“Infrared Microscope Detection of Particulate Inclusions in Tissues”, Dania P. Wahl, Biomaterials Graduate Program, State University of New York at Buffalo, (M.S.), 2011. Current Position: Research, Biotechnology Department, School of Medicine and Biomedical Sciences, State University of New York at Buffalo
“Identification of Critical Hemodynamic Parameters that Correlate to Bifurcation Sites with High Rates of Intracranial Aneurysm Occurrence”, Jaclyn M. Alfano, Department of Mechanical and Aerospace Engineering, (M.S.), 2011. Current Position: Research Associate, Toshiba Stroke Research Center, State University of New York at Buffalo
“Evaluation of Contact Friction in Fracture of Rotationally Bent Nitinol Endodontic Files”, Tariq S. Abuhaimed, Department of Mechanical and Aerospace Engineering, (Ph.D.), 2011, State University of New York at Buffalo. Current Position: Biomaterials Division Head, Faculty of Dentistry, KingAbdulAziz University, Kingdom of Saudi Arabia
“Endotoxin Removal by Radio Frequency Gas Plasma (Glow Discharge)”, Angela Poon, Department of Mechanical and Aerospace Engineering, (M.S.), 2011, State University of New York at Buffalo. Current Position: US Embassy, Japan, Instructor of English as a Second Language
“Strain-Induced Strengthening of Bioprosthetic Tissue in Physiologically Super-Saturated Calcium Phosphate Solution”, Corey D. Hmiel, Department of Mechanical and Aerospace Engineering, (M.S.), 2011, State University of New York at Buffalo. Current Position: Manufacturing Engineer, Corning Inc., Corning, NY
“Influence of Methylene Blue-Mediated Photodynamic Therapy on the Resistance to Detachment of Streptococcus mutans Biofilms from Titanium Substrata”, Lina Y. Sharab, Biomaterials Graduate Program, (M.S.) 2011, State University of New York at Buffalo. Current Position: Post Graduate Orthodontics Program, State University of New York at Buffalo, School of Dental Medicine.
“I. Synthesis and Characterization of Random Bottlebrush Copolymers with Polystyrene and Polylactide Side Chains; II Synthesis and Characterization of Organic Nanotubes”, Julia Kloecker, Department of Chemistry (M.A.), 2011, State University of New York at Buffalo. Current Position: PhD Student, ETH Department of Polymer Chemistry, Switzerland.
“Rapid Reconstruction of Temporomandibular Joints Using Ceramic Implants and Dental Adhesives”, Sandeepan Dutta, Department of Mechanical and Aerospace Engineering, (MS), 2011, State University of New York at Buffalo. Current Position: Engineering Supervisor, Sterris Corporation, Mentor, Ohio
“A Proposed Bioabsorbable Device for Esophageal Atresia Repair Using a Combined Endoluminal and Thoracoscopic Approach to Anastomosis that Utilizes Radio Frequency Glow Discharge Treatment for Material Sterilization and Surface Modification”, Benjamin Alfred Blankenship, Department of Mechanical and Aerospace Engineering, MS, 2012, State University of New York at Buffalo
“Temporomandibular Joint Prosthetic Design and Evaluation”, Christopher Dentinger, Department of Mechanical and Aerospace Engineering, (MS), 2012, State University of New York at Buffalo. Current Position: Research Engineering, Lockheed Martin Maritime Systems & Sensors MS2- Niagara, Niagara Falls, NY
“Pilot Explorations in Three Aspects of Tissue Adhesion: Pericardial Bonding, Retinal Detachment and Vascular Anastomosis”, Denzil Robin D’Souza, Department of Mechanical and Aerospace Engineering, (MS), 2012, State University of New York at Buffalo. Current Position: Medical Engineer, Greatbatch Medical, Inc., Clarence, NY
“Intracranial Aneurysm Rupture Risk Prediction and Endovascular Virtual Intervention”, Jianping Xiang, Department of Mechanical and Aerospace Engineering, (PhD), 2012, State University of New York at Buffalo. Current Position: PostDoctoral Fellow, Toshiba Stroke Research Center
“Influence of Surface Coatings and Surface-Active Liquid Lubrication on Cyclic Fatigue of Nickel-Titanium Rotary Endodontic Files in an Artificial Canal”, Yousef A. Alnowailaty, BDS, Biomaterials Graduate Program (MS), 2012, State University of New York at Buffalo. Current Position: Doctoral Candidate, Boston University
“Evaluation of a Hydrophobic ‘Easy-Release’ Silicone-Epoxy Coating for Maintaining Underwater Sealing of a Sliding Neoprene/Steel Interface Subject to Biofouling”, Vincent L. Andolina, BS, Biomaterials Graduate Program (MS), 2012, State University of New York at Buffalo. Current Position: Design Engineer, Sealing Devices, Inc., Orchard Park, NY
“Consideration of Alternative Designs for a Percutaneous Endoscopic Gastrostomy Feeding Tube”, Santosh Rohit Yerrabolu, Department of Mechanical and Aerospace Engineering (MS), 2012, State University of New York at Buffalo. Current Position: PhD Candidate, State University of New York at Buffalo
“Optimizing Photodynamic Therapy by Improving the Design of the Photosensitizer”, Courtney Michelle Saenz, Department of Molecular and Cellular Biophysics and Biochemistry (PhD), 2012, Roswell Park Cancer Institute Division of The Graduate School, State University of New York at Buffalo
“Characterization of Interphotoreceptor Retinoid-Binding Protein (IRBP) Domains to the Interphotoreceptor Matrix (IPM) of Rod and Cone Photoreceptors”, Mary Alice Garlipp, Graduate Program in Neuroscience (PhD), 2012, State University of New York at Buffalo. Current Position: Research Staff, Veterans’ Administration Medical Center, Buffalo, NY
“Improvement of Marginal Integrity around Titanium Alloy and Yttrium-Stabilized Zirconia Dental Implant Abutments, Rasha Ali, BDS, Biomaterials Graduate Program (MS), 2013, State University of New York at Buffalo. Current Position: Dental Faculty, Libya
“Adhesive Bone Bonding Prospects for Lithium Disilicate Ceramic Implants”,Sakthi Kumar Vennila Thirugnanam, BDS, Biomaterials Graduate Program (MS), 2013, State University of New York at Buffalo. Current Position: International Dentistry Program Candidate
“UltraPure Water and Extremophilic Bacteria Interactions with Germanium Surfaces”, Vasu Ranjan Sah, B. Tech., Biomaterials Graduate Program (MS), 2013, State University of New York at Buffalo. Current Position: Advanced Studies, Houston, Texas
“Endothelial Cells under High Wall Shear Stress and Spatial Gradients”, Jennifer M. Dolan, Neuroscience Program (PhD), 2013, State University of New York at Buffalo. Current Position: PostDoctoral Research, Toshiba Stroke Center, Global Vascular Research Institute, State University of New York at Buffalo
“Evaluation of Gingival Fibroblast Response to RadioFrequency Glow-Discharge-Treated (RFGDT) Resin Composite and PMMA Abutment Surfaces”, Arwa S. Alnoury, B.D.S., Biomaterials Graduate Program (MS) 2013, State University of New York at Buffalo. Current Position: Advanced Education in Endodontics and PhD program, Boston University
“The Characterization and Removal of Surgical Smoke Produced by Electrosurgical and Laser Devices”, Shanthi Chodagiri, B.S., Biomaterials Graduate Program (MS) 2013, State University of New York at Buffalo. Current Position: Research Associate, Phase III Clinical Trials, University of California at San Francisco
“Human Alveolar Osteoblast Response to Date-Expired Dental Implants Renewed by Hydrogen Peroxide Gas Plasma Sterilization”, Jacob Yousef Kadhum Al-Hashemi, B.D.S., Biomaterials Graduate Program (MS) 2013, State University of New York at Buffalo. Current Position: Dental Faculty, Baghdad, Iraq, accepted to Advanced Education in Endodontics & PhD Program, Boston University
“Computer Modeling of Neurovascular Flow Diverter”, Ding Ma, MS, Department of Mechanical and Aerospace Engineering (PhD) 2013, State University of New York at Buffalo. Current Position: Post-Doctoral Research, Toshiba Stroke Center, Global Vascular Research Institute, Buffalo, NY
“Hemodynamics-induced intracranial aneurysm initiation: mechanism exploration and model optimization”, Nicholas Liaw, Department of Mechanical and Aerospace Engineering (PhD) 2013, State University of New York at Buffalo, Current Position: Medical School
“Wear and Material Characterization of Temporomandibular Joint Ceramic Prosthesis”, Joseph S. Hong, B.S., Department of Mechanical and Aerospace Engineering (MS) 2013, State University of New York at Buffalo. Current Position: Manufacturing Engineer, Corning, Inc, KY
“Characterization of Foreign Body Materials in Oral and Maxillofacial Biopsies Using FT-IR Spectroscopy”, Amarpreet Sabharwal B.D.S, Oral Sciences (MS) 2013, School of Dental Medicine, State University of New York at Buffalo. Current Position: Radiology Fellow, Boston
“Moldable Ceramics for Use as a Temporomandibular Joint Implant”, Adam R. Macha, B.S., Department of Mechanical and Aerospace Engineering (MS) 2013, State University of New York at Buffalo, Current Position: Service Engineer, Buffalo, NY
“Mechanical & Physical Properties of Zirconia-based Ceramic Restorations”, Ishita Agarwal, B.D.S., Biomaterials Graduate Program (MS) 2013, State University of New York at Buffalo. Current Position: Advanced Clinical Program Applicant
“Elutable Components from Catalyst-Free Monolithic Self-Adhesive Methyl Silicone Patches”, Arshad F. J. Al Kaabi, B.S., Biomaterials Graduate Program (MS) 2014, State University of New York at Buffalo. Dental Faculty, Baghdad, Iraq
“Vortex Dynamics in Ruptured and Unruptured Intracranial Aneurysms”, Gabriel Trylesinski, B.S., Department of Mechanical and Aerospace Engineering (MS) 2014, State University of New York at Buffalo. Current Position: Engineer, France
“Characterizing Acrylic Pressure-Sensitive Adhesive Tapes Favoring Diverse Biomedical Applications”, Saleh M. Alhijji, B.S., Biomaterials Graduate Program (MS) 2014, State University of New York at Buffalo. Current Position: PhD studies, NY State College of Ceramics at Alfred University
“Application of Confocal InfraRed Imaging to Diverse Biomedical Problems”, Hassan S. Al-Khalidy, B.D.S., Biomaterials Graduate Program (MS) 2014, State University of New York at Buffalo. Current Position: Oral Medicine Faculty, Baghdad, Iraq
“Delmopinol-Induced Matrix Removal Facilitates Photodynamic Therapy and Chlorhexidine Methods for Disinfecting Mixed Oral Biofilms”, Stephen C. Rogers, B.S., Biomaterials Graduate Program (MS) 2014, State University of New York at Buffalo. Current Position: D.D.S. Student at SUNY Buffalo School of Dental Medicine.
“The Effect of Surface Coatings on Dental Anesthesia Needles”, April R. Skierczynski, B.S., Biomaterials Graduate Program (MS) 2014, State University of New York at Buffalo. Current Position: Dental Assistant, Orchard Park, NY
“Conversion and Automation of a Gas Plasma Treatment Device into a Reliable Sterilizer”, Arvind R. Ramaswamy, B.S., Mechanical and Aerospace Engineering (MS) 2014, State University of New York at Buffalo. Current Position: Optional Practical Training Internship
“Finite Element Modeling of Endovascular Intervention Enables Hemodynamic Characterization of Intracranial Aneurysm Treatment Strategies”, Robert J. Damiano B.S, Mechanical and Aerospace Engineering (MS) 2015, State University of New York at Buffalo. Current Position: PhD Candidate, MAE, SUNY Buffalo
“Improved Manufacture of Fluorocarbon-based Artificial Blood”, Vijay Manoj Srinivasan Ragothaman, B. Tech., Mechanical and Aerospace Engineering (MS by Comprehensive Examination) 2015, State University of New York at Buffalo. Current Position: Optional Practical Training candidate
“ICE ADHESION: Correlation with surface energies of reference materials”, Faraaz Mohammad Siraj, B.S., Mechanical and Aerospace Engineering (MS, Project) 2015, State University of New York at Buffalo. Current Position: Optional Practical Training in Wind Turbine Technology
“3D Printed Flow-Model Tests of Novel Retrievable Asymmetric Stent Flow Diverters”, Aradhana Ashok Yoganand, B.S., Biomedical Engineering (MS) 2015, State University of New York at Buffalo. Current Position: Medical Engineer, Penumbra Corp., San Francisco, CA
“Influence of Hyaluranon (HA) Preparations on Ionizing-Radiation-Treated Collagen-based Tissues” Aaron T. Huber, B.S., Biomaterials Graduate Program (MS) 2015, State University of New York at Buffalo. Current Position: Construction Engineering
“Effects of Surface-Active Dehydration of Etched Dentin on Bonding to Restorative Resin Material”, Sameer D. Jain, B.D.S., Biomaterials Graduate Program (MS) 2015, State University of New York at Buffalo. Current Position: Endodontics Program, University of Houston
“A Particle Image Velocimetry (PIV) Study Relevant to Verification and Validation of a Computational Fluid Dynamics (CFD) Tool Visualizing Intracranial Aneurysm Hemodynamics”, Christopher David Martensen (MS) 2015, Department of Biomedical Engineering, State University of New York at Buffalo. Current Position: Baxter Healthcare, Medina, NY
“Safer Reaming Tools for Hard Biological Tissues” Santosh Rohit Yerrabolu, MS, Department of Mechanical and Aerospace Engineering, (PhD) 2015, State University of New York at Buffalo.


Current Graduate Student Advisement (those who have achieved candidacy):

Pauline Paul Nesaraja, M.S., Department of Geology (Ph.D.), State University of New York at Buffalo, Adhesion-Induced Regulation of Metabolic Pathways in Desulfovibrio vulgaria Hildenborough, May, 2016 defense anticipated

Robert T. Zanghi, Department of Mechanical and Aerospace Engineering (M.S.), State University of New York at Buffalo, Bioactive Ceramic Coatings of Stent-Graft Mesh Margins to Resist Endovascular Leakage, defense anticipated August 2016

Warren Dabney, M.S., Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo, Monitoring and Minimization of Electrode/Tissue Interfacial Heating in Magnetic Resonance Imaging Fields, anticipated defense May 2016


Aime`e Marko, Department of Cell Stress Biology (PhD), Roswell Park Cancer Institute Division of Graduate School ,State University of New York at Buffalo, Cooperative Photodynamic and Photocatalytic Therapies for Tumor Eradication, anticipated defense September 2015


1   2   3   4   5   6   7


The database is protected by copyright ©dentisty.org 2016
send message

    Main page