Lamptron switch with blue backside



Download 5.88 Kb.
Date conversion28.01.2017
Size5.88 Kb.
Lamptron switch with blue backside

+ = To connect the LED in the button

+ for HDD LED or power LED on mainboard

or + to connect to 5V-12V feed in pc. (Red or yellow on Molex for example)



GND for HDD LED or power LED on mainboard

or - to connect to 5V-12V feed in pc. (Black on Molex for example)

-------------------------------------------------------------------------------------------------------

To use the button as a power or reset button for your pc you’ll always need the C and NO contact

C = Common of the momentary switch.

NO = normally open contact of the momentary switch.

NC = normally closed contact of the momentary switch.

Lamptron switch with white backside

+ = To connect the LED in the button

+ for HDD LED or power LED on mainboard

or + to connect to 5V-12V feed in pc. (Red or yellow on Molex for example)



  • = To connect the LED in the button

GND for HDD LED or power LED on mainboard

or - to connect to 5V-12V feed in pc. (Black on Molex for example)

-------------------------------------------------------------------------------------------------------

To use the button as a power or reset button for your pc you’ll always need the 3 and 4 contact



  1. = Common for the normally closed contact of the momentary switch.

  2. = Normally closed contact of the momentary switch.



  1. = Common for the normally open contact of the momentary switch.

  2. = Normally open contact of the momentary switch.


The database is protected by copyright ©dentisty.org 2016
send message

    Main page