Dentsply prosthetics



Download 139 Kb.
Date01.02.2017
Size139 Kb.

DENTSPLY International

DENTSPLY PROSTHETICS
Safety Data Sheet


Safety Data Sheet (in compliance with Regulation (EC) 1907/2006, Regulation (EC) 1272/2008 and Regulation (EC) 453/2010), US 29CFR1910.1200, Canada Hazardous Products Regulation


Date Issued: 28 July 2008

Document Number: 381

Date Revised: 17 July 2015

Revision Number: 2



  1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING

1.1 Product Identifier:

Trade Name (as labeled): Ney® Handpiece Oil

Part/Item Number: 7200034, 7200035

1.2 Relevant Identified Uses of the Substance or Mixture and Uses Advised Against:

Recommended Use: Lubricating Laboratory Handpieces

Restrictions on Use: For Professional Use Only

1.3 Details of the Supplier of the Safety Data Sheet:

Manufacturer/Supplier Name: DENTSPLY Prosthetics

Manufacturer/Supplier Address: 570 West College Ave.

York, PA 17401

Manufacturer/Supplier Telephone Number: 717-845-7511 (Product Information)

Email address: Prosthetics_MSDS@Dentsply.com

1.4 Emergency Telephone Number:

Emergency Contact Telephone Number: 800-424-9300 Chemtrec

  1. HAZARDS IDENTIFICATION

2.1 Classification of the Substance or Mixture:

GHS Classification:

Health

Environmental

Physical

Not Hazardous

Not Hazardous

Not Hazardous

2.2 Label Elements:

None Required



Signal Word: None

Hazard Phrases

Precautionary Phrases

None Required

None Required


2.3 Other Hazards: None known.


  1. COMPOSITION/INFORMATION ON INGREDIENTS

3.2 Mixture:













Hazardous Components

C.A.S. #

EINECS # /

REACH Registration #

Classification

WT %

Distillates (petroleum), hydrotreated heavy paraffinic

64742-54-7

265-157-1 /

Not Applicable

80-85

The exact concentration is being withheld as a trade secret.
Refer to Section 16 for the full text of the GHS Classifications.


  1. FIRST AID MEASURES




4.1 Description of First Aid Measures:

Eye

Flush victim's eyes with large quantities of water, while holding the eyelids apart. Get medical attention if irritation develops or persists.

Skin

Wash skin thoroughly with soap and water. Get medical attention if irritation develops or persists. Remove and launder clothing before re-use.

Inhalation

Remove victim to fresh air. If breathing is difficult or irritation persists, get medical attention.

Ingestion

Do not induce vomiting unless directed to do so by a medical professional. Get medical attention if symptoms develop or if you feel unwell.




4.2 Most Important Symptoms and Effects, Both Acute and Delayed:

May cause mild eye irritation. Prolonged or repeated contact may cause mild skin irritation. Inhalation of processing mists or vapors may cause respiratory tract irritation. Ingestion can cause gastrointestinal irritation, nausea, vomiting and diarrhea.




4.3 Indication of Any Immediate Medical Attention and Special Treatment Needed:

Immediate medical attention should not be required.




  1. FIRE-FIGHTING MEASURES




5.1 Extinguishing Media:

Use carbon dioxide, ABC powder, foam and water spray or fog. Do not use a solid water stream as it may scatter and spread fire.




5.2 Special Hazards Arising from the Substance or Mixture:

Incomplete combustion and thermolysis may produce gases of varying toxicity such as carbon monoxide, carbon dioxide, various hydrocarbons, aldehydes and soot. These may be highly dangerous if inhaled in confined spaces or at high concentration.




5.3 Advice for Fire-Fighters:

Fire Fighting Procedures/Precautions for Fire Fighters:

Firefighters should wear full emergency equipment and approved positive pressure self-contained breathing apparatus. Do not enter fire area without proper protection. Cool exposed intact containers with water spray.




  1. ACCIDENTAL RELEASE MEASURES




6.1 Personal Precautions, Protective Equipment and Emergency Procedures:

Evacuate spill area and keep unprotected personnel away. Remove all sources of ignition. Avoid breathing vapors or mists. Ventilate area. Avoid contact with skin, eyes or clothing. Wear appropriate protective clothing as described in Section 8.




6.2 Environmental Precautions:

Report releases as required by local and national authorities.




6.3 Methods and Material for Containment and Cleaning up:

Contain and collect using an inert absorbent material and place in appropriate containers for disposal. Clean spill site with water.




6.4 Reference to Other Sections:

Refer to Section 8 for Personal Protective Equipment and Section 13 for Disposal information.




  1. HANDLING AND STORAGE




7.1 Precautions for Safe Handing:

Avoid contact with skin, eyes or clothing. Wear protective clothing and equipment as described in Section 8. Avoid breathing mists or vapors. Use with adequate ventilation. Wash thoroughly with soap and water after handling. Keep containers closed when not in use.
Do not reuse containers. Empty containers retain product residues and contaminants that can be hazardous. Follow all SDS precautions when handling empty containers.

7.2 Conditions for Safe Storage, Including Any Incompatibilities: Keep away from food and drinks. Keep in a bounded area. Keep container tightly closed. Keep preferably in the original container. Otherwise reproduce all indication of the regulation label on the new container. Do not remove the hazard labels of the containers (even if they are empty). Design the installations in order to avoid accidental emissions of product (due to seal breakage, for example) onto hot casings or electrical contacts. Protect from frost, heat and sunlight. Protect from moisture.

7.3 Specific End Use (s): For professional use only.




  1. EXPOSURE CONTROLS/PERSONAL PROTECTION




8.1 Control Parameters:

Occupational Exposure Limits:

Distillates (petroleum), hydrotreated heavy paraffinic

5 mg/m3 TWA ACGIH TLV (inhalable) (As mineral oil, refined)

5 mg/m3 TWA OSHA PEL (as oil mist, mineral)

5 mg/m3 TWA UK WEL (as oil mist, mineral)

Belgium: 5 mg/m3 TWA (as oil mist, mineral)



Biological Exposure Limits: None Established




8.2 Exposure Controls:

Appropriate Engineering Controls: Use with adequate general or local exhaust ventilation to minimize exposures levels.


Individual Protection Measures (PPE):

Specific Eye/face Protection: Chemical safety glasses are recommended where splashing is possible.

Specific Skin Protection: Wear impervious gloves to avoid prolonged skin contact.

Specific Respiratory Protection: None should be needed for normal use. If the occupational exposure limits are exceeded, an approved respirator with dust/mist cartridges or supplied air respirator appropriate for the form and concentration of the contaminants should be used. Selection and use of respiratory equipment must be in accordance with applicable regulations and good industrial hygiene practice.

Specific Thermal Hazards: None required




  1. PHYSICAL AND CHEMICAL PROPERTIES

9.1 Information on Basic Physical and Chemical Properties:

Appearance:

Green liquid

Explosive limits:

LEL: Not applicable

UEL: Not applicable

Odor:

Petroleum distillates odor

Vapor pressure (mmHg):

Not available

Odor threshold:

Not available

Vapor density:

Not available

pH:

Not available

Relative density:

0.864 @ 15ºC(59ºF)

ASTM D 1298



Melting/freezing point:

Not available

Solubility(ies):

Not available

Initial boiling point and boiling range:

Not available

Partition coefficient: n-octanol/water:

Not available

Flash point:

207ºC (405ºF) Cleveland Open Cup (COC) ASTM D 92

Auto-ignition temperature:

Not applicable

Evaporation rate:

Not available

Decomposition temperature:

Not available

Flammability

(solid, gas):

Not applicable

Viscosity:

Kinematic: 32.0 mm2/s @ 40 ºC (104ºF) ASTM D 445

Explosive Properties:

Not explosive

Oxidizing Properties:

Not an oxidizer

9.2 Other Information: None available.

  1. STABILITY AND REACTIVITY




10.1 Reactivity: None known.

10.2 Chemical Stability: Stable under normal conditions.

10.3 Possibility of Hazardous Reactions: None under normal processing.

10.4 Conditions to Avoid: Heat (temperatures above flash point), sparks, ignition points, flames and static electricity.

10.5 Incompatible materials: Strong oxidizing agents.

10.6 Hazardous Decomposition Products: Incomplete combustion and thermolysis may produce gases of varying toxicity such as carbon monoxide, carbon dioxide, various hydrocarbons, aldehydes and soot.




  1. TOXICOLOGICAL INFORMATION

11.1 Information on Toxicological Effects:

Potential Health Effects:

Eyes: May cause mild eye irritation.

Skin: Prolonged or repeated contact may cause mild skin irritation.

Ingestion: Ingestion can cause gastrointestinal irritation, nausea, vomiting, and diarrhea.

Inhalation: Inhalation of processing mists or vapors may cause respiratory tract irritation.

Chronic Health Effects: None known.

Irritation: No data available.

Corrosivity: No data available. This product is not expected to be corrosive.

Sensitization: No data available.


Carcinogenicity: None of the components of this product are listed as carcinogens by OSHA, IARC, NTP, or the EU CLP.

Mutagenicity: No data available.

Acute Toxicity Data:

Distillates (petroleum), hydrotreated heavy paraffinic: Oral rat LD50 > 5000 mg/kg, inhalation rat LC50: 2.18 mg/L, dermal rabbit LD50 > 2000 mg/kg



Reproductive Toxicity Data: No data available.

Specific Target Organ Toxicity Single Exposure (STOT-SE): No data available


Specific Target Organ Toxicity Single Exposure (STOT-SE): No data available




  1. Ecological Information




12.1 Toxicity:

Distillates (petroleum), hydrotreated heavy paraffinic: Pimephales promelas LL50 > 100 mg/L/96hr



12.2 Persistence and Degradability: No data available.

12.3 Bio-accumulative Potential: No data available.

12.4 Mobility in Soil: Given its physical and chemical characteristics, the product generally shows low soil mobility.

12.5 Results of PBT and vPvB Assessment: Not applicable

12.6 Other Adverse Effects: None




  1. DISPOSAL CONSIDERATIONS

13.1 Waste Treatment Methods:

Waste Treatment Recommendations: Dispose in accordance with national and local regulations.




  1. TRANSPORT INFORMATION







14.1 UN Number

14.2 UN Proper Shipping Name

14.3 Hazard

Class(s)

14.4 Packing Group

14.5 Environmental Hazards

DOT

None

Not Regulated

None

None

Not applicable

ADR/RID

None

Not Regulated

None

None

Not applicable

IMDG

None

Not Regulated

None

None

Not applicable

IATA/ICAO

None

Not Regulated

None

None

Not applicable


14.6 Special Precautions for User: Not applicable.
14.7 Transport in Bulk According to Annex II of MARPOL 73/78 and the IBC Code: Not applicable.


  1. REGULATORY INFORMATION

15.1 Safety, Health and Environmental Regulations/Legislation Specific for the Substance or Mixture:

U.S. Federal Regulations

Comprehensive Environmental Response and Liability Act of 1980 (CERCLA): This product is not subject to CERCLA reporting requirements. Many states have more stringent release reporting requirements. Report spills required under federal, state and local regulations.



Toxic Substances Control Act (TSCA): All of the components of this product are listed on the TSCA inventory.

Clean Water Act (CWA): This material is not regulated under the Clean Water Act.

Clean Air Act (CAA): This material is not regulated under the Clean Air Act.

Superfund Amendments and Reauthorization Act (SARA) Title III Information:

SARA Section 311/312 (40 CFR 370) Hazard Categories: Not Hazardous
This product contains the following toxic chemical(s) subject to reporting requirements of SARA Section 313 (40 CFR 372): None
State Regulations

California: This product contains the following chemicals that are known to the State of California to cause cancer, birth defects or other reproductive harm: None

International Regulations

Canadian Environmental Protection Act: All of the components in this product are listed on the Domestic Substances list (DSL).

European Inventory of Existing Chemicals (EINECS): All of the components in this product are listed on the EINECS inventory or exempt from notification.
EU REACH: All components requiring registration have been pre-registered.
Australian Inventory of Chemical Substances: All of the components in this product are listed on the AICS for Australia.
China Inventory of Existing Chemicals and Chemical Substances: All of the components in this product are listed on the IECSC for China.
Japanese Existing and New Chemical Substances: All of the components in this product are listed on the Japanese ENCS list.
Korean Existing Chemicals List: All of the components in this product are listed on the KECL for Korea.
Philippine Inventory of Chemicals and Chemical Substances: All of the components in this product are listed on the PICCS.
15.2 Chemical Safety Assessment: None required.


  1. OTHER INFORMATION


HMIS Hazard Rating:

Health: 0 Flammability: 1 Physical Hazard: 0

Full Text of Hazard Statements and Abbreviations used In Section 3:

None
Supersedes: 28 July 2008

Date Updated: 17 July 2015

Revision Summary: Updated format. Comprehensive review.



Data Sources: US NLM ChemID Plus and HSDB, Substance SDS for components, ECHA Registered Substances, C&L Inventory, Country websites for occupational exposure limits.



Ney® Handpiece Oil Page of

Directory: content -> dam -> dentsply -> pim -> manufacturer -> Prosthetics -> Fixed -> Ceramics -> Tools Accessories
dam -> Strategies for Increasing / Monitoring Reading Rate
dam -> Our customer terms cloud services recent changes
dam -> Recent Changes 1This document lists recent changes to the Telstra Mobile section of Our Customer Terms
dam -> Recent Changes 1This document lists recent changes to the ip solutions section of Our Customer Terms
dam -> 2 e Examples of significant changes made to courses, programs, and the unit in response to data gathered from the assessment system
dam -> Dat – Dental Admission Test Pre-Professional Advising Center
dentsply -> U. S. Student clinic winners 1959 new york city
Tools Accessories -> Dentsply international Safety Data Sheet
dentsply -> Henry m. Thornton/scada fellowship award recipients $103,000 awarded since inception


Share with your friends:


The database is protected by copyright ©dentisty.org 2019
send message

    Main page