City Centre 3 1 Location and extent



Download 2.4 Mb.
Page1/2
Date conversion19.07.2018
Size2.4 Mb.
  1   2
5.3.2 City Centre

5.3.2.1 Location and extent



  1. The Locality Streets in the City Centre Neighbourhood Plan area are indicated on the Streetscape hierarchy overlay map and on Figure 5.3.2.1a.

  2. All streetscape works occurring within the Locality Streets indicated in Figure 5.3.2.1a, must comply with the character specified in this document.

  3. Streetscapes outside these areas may be developed in keeping with this character, at the discretion of the developer and subject to Council approval.

5.3.2.2 Standard footway elements and materials

  1. These locality guidelines are to be read in conjunction with Chapter 3 – Road corridor design of the Infrastructure design planning scheme policy.

  1. Footway upgrades are to include new surfacing, new or reinstated kerb and channel, driveways, pedestrian kerb crossings, tactile markers, roof water drainage line connections, service pit lids, street trees, garden beds, furniture and pedestrian lighting applicable to the streetscape type.

  2. The scope, layout and detail of the footway upgrades are to be agreed on a site by site basis through the development assessment process.

5.3.2.3 Streetscape hierarchy

5.3.2.3.1 Streetscape types overview

  1. The locality streets within the City Centre Neighbourhood Plan area are exceptions to the standard streetscape hierarchy.

  1. The streetscape type and specifications for locality streets in this area are shown in Figure 5.3.2.1a and outlined in this document.

5.3.2.3.2 Type 1 - Locality streetscape specifications

The streetscape specifications for Type 1 Locality Street are outlined in Table 5.3.2.3.2A.

Table 5.3.2.3.2A – Streetscape type and specifications

Component

Type 1 - Design specifications

Verge width

As existing

Pavement width

Full width pavement

Unobstructed pavement

2.4m

Paving materials

Type: Honed coloured concrete with sawcut pattern.

Supplier: Hanson (code 10050284), Boral or approved equivalent.

Colour: CCS ‘Liquorice’ 90% ‘Blue Heeler’ + 10% ‘Winter Brown’


Tactile markers

Type: Concrete tactile pavers 300 x 300mm

Supplier: ‘Chelmstone’, ‘Urbanstone’ or approved equivalent

Colour: CCS ‘Ghost Gum’


Driveways

Honed coloured concrete to match footway

Furniture

All furniture is to be located outside of the unobstructed pavement area.

Furniture elements and layout requirements are to be agreed on a site by site basis through the development assessment process.

Refer to 3.7.6 Design standards for street furniture for standard furniture elements and specifications.


Trees

Refer to 5.3.2.4 Planting.

Garden beds

No garden beds.

5.3.2.3.3 Type 2 - Locality streetscape specifications (Anzac Square)

The streetscape specifications for Type 2 Locality Street are outlined in Table 5.3.2.3.3A and shown in Figure 5.3.2.3.3a.

Table 5.3.2.3.3A – Streetscape type and specifications

Component

Type 2 - Design specifications

Verge width

As existing

Pavement width

Full width pavement

Unobstructed pavement

2.4m

Paving materials - Body

Match existing.

Supplier: Boral or approved equivalent

Material: ‘Stylestone’ concrete flag paver

Colour: ‘Tan’ (003)

Size: 400mm x 400mm

Finish: honed



Band and highlight panel

Match existing.

Supplier: Boral or approved equivalent

Material: ‘Stylestone’ concrete flag paver

Colour: ‘Silver’ (015)

Size: 400mm x 400mm

Finish: honed



Tactile markers

Type: Concrete tactile pavers 300 x 300mm

Supplier: ‘Chelmstone’, ‘Urbanstone’ or approved equivalent

Colour: CCS ‘Ghost Gum’


Driveways

Honed coloured concrete to match footway

Furniture

All furniture is to be located outside of the unobstructed pavement area.

Furniture elements and layout requirements are to be agreed on a site by site basis through the development assessment process.



Refer to 3.7.6 Design standards for street furniture for standard furniture elements and specifications.

Trees

Refer to 5.3.2.4 Planting.

Garden beds

None.



5.3.2.3.4 Type 3 - Locality streetscape specifications (King George Square)

The streetscape specifications for Type 3 Locality Street are outlined in Table 5.3.2.3.4A and shown in Figure 5.3.2.3.4a and Figure 5.3.2.3.4b.

Table 5.3.2.3.4A – Streetscape type and specifications

Component

Type 3 - Design specifications

Verge width

As existing

Pavement width

Full width pavement

Unobstructed pavement

2.4m

Paving Type P2

Match existing.

Material: 205mm x (200,400, 600, 800)mm ‘Oyster Pearl” granite paver, flamed finish.

Highlight Pavers:


  1. P12: 205mm x (200, 400, 600, 800)mm ‘Rous Ridge’ basalt paver, bright etched finish;

  2. P13: 205mm x (200, 400, 600, 800)mm ‘Misty Cloud’ paver, flamed finish.

Paving type P3

Match existing.

Main Paver Material: 415mm x (200, 400, 500, 600, 700,800, 900, 1000)mm ‘Oyster Pearl” granite paver, flamed finish

Highlight Pavers: (P12) 415mm x 1000mm ‘Rous Ridge’ basalt paver, bright etched finish.


Paving type P4

Match existing.

Main Paver Material: 615mm x 1000mm ‘Oyster Pearl” granite paver, flamed finish.

Highlight Pavers:


  1. P12: 205mm x 500mm ‘Rous Ridge’ basalt paver, bright etched finish;

  1. P13: 205mm x1m ‘Misty Cloud’ paver, flamed finish;

  2. P4: 404mm x 1m‘ Oyster Pearl” granite paver, flamed finish.

Paving type P5/P6

Match existing.

Paver Material: 620mm x 1.520m typical ‘Rous Ridge’ basalt paver, bright etched finish.



Paving type P7

Match existing.

Paver Material: 400mm x 1m typical ‘Rous Ridge’ basalt paver, bright etched finish.



Paving type P10

Match existing.

Paving type P14

Match existing.

Paver Material: 100mm x (195, 400, 600)mm ‘Rous Ridge’ basalt paver, bright etched finish.



Paving type P15

Match existing.

Main Paver Material: 100mm x (195, 400, 600)mm ‘Oyster Pearl’ paver, flamed finish.

Highlight Pavers:


  1. P12: 100mm x 400mm ‘Rous Ridge’ basalt paver, bright etched finish;

  1. P13: 100mm x 600mm ‘Misty Cloud’ paver, flamed finish.

Paving type P17

Match existing.

Paver Material: 100mm x 300mm ‘Rous Ridge’ basalt paver, bright etched finish.



Tactile markers

Match existing.

Driveways

Honed coloured concrete to match footway

Furniture

All furniture is to be located outside of the unobstructed pavement area.

Furniture elements and layout requirements are to be agreed on a site by site basis through the development assessment process.



Refer to 3.7.6 Design standards for street furniture for standard furniture elements and specifications.

Trees

Refer to 5.3.2.4 Planting.

Garden beds

None.