Allahabadban k



Download 87.65 Kb.
Date conversion08.07.2018
Size87.65 Kb.
A L L A H A B A D B A N K

(A. Govt. of India Undertaking)



Zonal Office, Delhi-NCR

1st floor, 17 Parliament Street, New Delhi –110 001

NOTICE INVITING TENDER FOR INTERIOR/ FURNISHING

WORK AT BANK’S SAHIBABAD BRANCH Dist. Ghaziabad
Allahabad Bank invites quotations from Bank’s empanelled Contractors/Firms, for captioned work at Bank’s Sahibabad Branch, Dist. Ghaziabad.
Sealed Quotations in the prescribed schedule super scribing name of work and firm’s name may be submitted at the Zonal Office, Delhi-NCR at 1st floor, 17, Parliament Street, New Delhi-110001 during office hours up to 08/08/2013.

Hard Copy of the prescribed schedule of quantities may also be obtained from Bank’s Zonal Office.


The Bank reserves the right to accept or reject any or all quotations without assigning reasons whatsoever.

Date: 25/07/2013


Deputy General Manager
ALLAHABAD BANK

Schedule of Quantities for Interior/furnishing work

At SAHIBABAD Branch Dist. Ghaziabad

Note: Rates should be inclusive of: -

All taxes, wastage, transportation, loading/unloading, disposal of waste/ malba/ unserviceable material out of Bank’s premises at the place earmarked by the local authority.

Sl

No

Description of Item

Unit

Qty.

Rate

(Rs.)

Amt. (Rs.)

1

Providing, fabricating and erecting in position totally flushed suspended false ceiling with 12.0mm thick Gypsum board, fixed to a metal frame work comprising of ceiling channel of size 80mmx26mmx0.5mm @ every 457cm centre, inter channel 45mmx15mmx0.9mm @ every 1220 cm centres, peri-meter channel 20mmx26 mm all along the wall/partitions, strap hanger suspenders 25mmx0.5mm with nuts and bolts 6.4mmx12.7mm, connecting clips 2.6mm thick, dry walls screws 25m long, soffit cleats 27mmx37mmx25mmx1.6mm thick and dash fastenes / rawl plugs 12.5 mm diax35mm long with 6mm dia bolts etc. complete with recommended fillers, paper tapes and applying two coats of acrylic emulsion paint of approved shade and make over a coat of primer including making necessary cut outs for light fittings/ ACs etc. compete as per manufacture's specifications.

Sft

1250







2.

Supplying and erecting Wall paneling / Column encasing (up to false ceiling) as per drawing and design and conforming to the following specifications :

Basic frame work:


Well seasoned Malaysian Sal/ Kail/ Mirandi wood sections, treated with two coats of wood preservatives. 38 mm x 19mm, at maximum 600mm horizontal & vertical spacing as per site conditions. Vertical members shall be suitably anchored at ceiling level to ensure rigidity.

Skin membrane :

6 mm thick BWR grade plywood on face.



Finishing :

1.0mm thick laminate sheet of same or combination shades with grooves as per instructions.



Skirting- 100x12mm steam beach / teak wood skirting duly polished/ painted as directed.

Quoted rates shall include all necessary materials, accessories and labour and also for making provisions for electrical/telephone/computer wiring, conduits and switch boxes, etc. where ever required.

Sft.

200







3.

Supplying and erecting full height partly glazed partitions as per following specifications:

Basic frame work: Well seasoned Malaysian Sal/ Kail/ Mirandi wood sections, treated with two coats of wood preservatives, 60mm x 40mm, at maximum 600mm horizontal and vertical spacing as per site conditions. Vertical members shall be suitably, anchored at floor & ceiling level to ensure rigidity.

Exposed frame members in the glazed portions shall have wider spacing (approx. 1200 mm) and be finished with 1.00 mm thick laminate of same or combination shades, over 6mm BWR grade ply.



Skin membrane: (Opaque portion up to 900mm from floor level and from 2100mm to ceiling, finished with 6mm thick BWR grade plywood on each face with grooves, as per drawings/ instructions.

Finishing: 1.0mm thick laminate of same or combination shades with grooves as per instructions.

Glazing: 6mm thick clear float glass fixed with polished teak / steam beech wood glazing beads of approved shape (finished 12 x 25mm).

Skirting- 100x12mm steam beach / teak wood skirting duly polished / painted as directed.

Quoted rates shall include all necessary materials, accessories and labour and also to make provisions for electrical / telephone / computer wiring conduits and switch boxes, etc. (Materials for wiring conduits, switches etc. shall be separately paid for)

Sft.

315








4.


Supply and erecting low height opaque partitions (up to maximum 1200mm height) conforming to the following specifications :

Basic frame work: Well seasoned Malaysian Sal/Kail/ Mirandi/Mirandi wood sections, treated with two coats of wood preservatives, 60 mm x 40 mm, maximum 600 mm horizontal and vertical as per site conditions.

Skin membrane: 6 mm thick BWR grade ply on each face.

Finishing: 1.0-mm thick laminate of same or combination shades with grooves as per instructions.

Edge moulds: All free top/ end surfaces shall have polished teak / steam beech wood moulds of approved shape (from 18 x 50mm sections).

Skirting- 100x12mm steam beach / teak wood skirting duly polished/ painted as directed.

Quoted rates shall include all necessary materials, accessories and labour and also allow provisions for electrical / telephone/computer wiring, conduits and switch boxes, etc. (Materials for wiring, conduits and switch boxes shall be separately paid for.) NEW PARTIOTION

Sft


110








5.

Carefully removing, shifting of old partitions (any type) from existing premises nearby & installation of same at the new premises. Rate to include all necessary new/additional material, if required, for satisfactory completion of work.

Sft.

60







6A

Providing and erecting in position Cash Work Station (to accommodate 1 cashier), comprising of clerical workstation of approx. size 1200x750x750mm made of 19mm thick block board pasted with 1.00mm laminate inclusive of a 1150 mm high, 300mm wide customer top. Writing top & customer top should be finished with mirror polished; 18mm thick granite slab (Jet black/Ruby granite) with rounded edges and sides with 1.0mm thick laminate of approved shade/make. The workstations shall be supported from the partition system made of 19mm thick BWR grade block board finished with 1.00 mm thick laminate of approved shade/make. Free edges shall have 18 mm thick, polished white or steam beach wood moldings of half-round profile as per drawings and instructions and 100x12mm steam beach / teak wood skirting duly polished/ painted as directed.

Each cash workstation shall comprise of the drawer unit, Tea tray at top, Cash drawers with approved telescopic channels for drawer-slides, automatic locks (keys in duplicate), wire managers, space for computer CPU, modesty panel and other necessary hardware and accessories including satin finish S. S. handles of approved quality. Inner face of cash counter to be provided with 16G, G.I. sheet. Inner faces of drawers/ cabinets to be painted/ polished in approved shade.


Rft

5’








6 B

Carefully removing, shifting of existing cash counter from the premises nearby and re-fixing the same at the new premises. Rate to include necessary material, if required, for satisfactory completion of work.

Rft

4’10”







7A


Providing & fixing 12mm thick clear float glass on cash counters with S S clamps, necessary polished beadings etc complete all as directed by the Bank.

Sft



35








7B.

Carefully taking out old 12 mm glass, shifting and re-fixing the same as per requirement with necessary labour and material

Sft

35







8


Supplying and erecting clerical counters (running tables) 750mm deep and 750mm high including drawer –cum-cabinet unit for files, space for computer CPU, wire managers, modesty panel, tea tray etc. made with 19mm thick BWR grade block board on top and supporting sides / front with necessary well seasoned Malaysian Sal/ Kail/ Mirandi wood frame work, finished on top with mirror polished, 18mm thick granite slab (Jet black/Ruby granite) with rounded edges and sides with 1.0 mm thick laminate of approved shade and quality, including providing and fixing 450mm long key board tray of approved shade, hardware and accessories at each of the counter. All exposed edges of block board are to be provided with half round teak wood mouldings, duly polished and 100x12mm steam beach / teak wood skirting duly polished/ painted as directed. Inner faces are to be painted/ polished in approved shade.

Rate to include charges for brass hardware fittings as well as fixtures like sliding gear for drawers of ‘Earl Behari’ or equivalent approved make.

Rft

12







9A

Supplying and fixing in position overall 37 mm thick solid core hot pressed phenol formaldehyde bonded flush door finished with 1.0 mm thick laminate of approved shade and quality on both sides of the door shutter & beading on edges including cost of hardware fittings e.g. Godrej night latch / mortice lock, hinges, door closure, handles etc. of approved make and quality.

Sft.



19








9B

Carefully taking out old flush door from existing nearby premises, shifting and refixing the same as per requirement in the new premises.

Sft.


15







10

Supplying and fixing in position 37 mm thick solid core hot pressed phenol formaldehyde bonded partly glazed flush door shutter of approved make finished up to 900 mm from floor level with 1.00 mm thick laminate of approved quality on both sides of the door shutter & beading on edges. The upper portion of the shutter is to be provided with 6 mm thick clear float glass fixed with white or steam beech wood glazing beads of approved design, complete as per drawing.

Rate to include cost of hardware fittings e.g. mortice lock, hinges, handles, door, closer etc. of approved make and quality.

Sft.


60








11

Providing and erecting in position low height Storage cabinet Made of 19 mm thick BWR grade block board including intermediate shelves etc. confirming to following specifications:

Shutter faces shall be finished with 1mm thick laminate of same or combination shades as per instructions with polished white or steam beech wood (6mm thick) edge lippings and 100 x 12 mm steam beach / teak wood skirting duly polished/painted as directed. Inner faces of cabinet including shutters shall be painted in approved shade. Shutters will be hung by auto-closing hinges, locks, magnetic door catcher and stain finished S.S. handles etc. of approved make. (Payment will be on the area of cabinet face)

Maximum 400mm deep x 900mm high


Sft.

60







12

Carefully removing, shifting of customer writing ledge from existing premises nearby & re-fixing the same at the new premises. Rate to include necessary material, if required, for satisfactory completion of work.

Each


1








13

Carefully removing, shifting of Cheque Drop Box from existing premises nearby & re-fixing the same at the new premises. Rate to include cost of necessary hardware fittings e.g. hinges, lock, knob, etc. of approved design and quality.

Each


1







14

Supplying and erecting suggestion box (over all size 400mmx150mmx600mm made of 19 mm thick BWR grade ply board and curved portion at top made out of 90mmx90mm C.P. teak/steam beach wood section. A slit opening of 10mmx150mm is to be provided at the top of the box. An openable shutter of 259mmx262mm size made of 19 mm thick BWR grade block board is to be provided. All the exposed timber surface including all free edges are to be finished with 1mm thick laminate sheet of combination shade. Inner faces of block board surfaces are to be polished/painted as directed. Rate to include cost of necessary hardware fittings e.g. hinges, lock, knob, etc. of approved design and quality.

Each

1







15

Providing and erecting in position side cabinet units with shutters of approx size of 400mm deep x 700mm high made of 19mm thick BWR grade block boards including intermediate shelves as per drawing / instructions. Exposed surfaces shall be finished with 1.00mm laminate of approved shade and make. Inner faces shall be polished/ painted in approved shade. Free edges of block board shall be finished with polished white or steam beech wood half round moulds (out of 20 x 20 mm sections).Inner faces of cabinet units shall be polished in approved shade Quoted rates shall include cost of necessary hardware, viz handles, locks with keys in duplicate, etc.

Sft.

18








16

  1. Less: Quote the amount which you will offer to reduce from the total amount of the bill of the complete work after re-using old materials including dismantled partition, tables, cupboards etc., held with the Sahibabad Branch in the premises where the furnishing work is to be done, to maximum extent after complete repair and providing & fixing 1mm laminate of approved make/shade over 6mm thick ply to match with Bank’s approved color scheme.

  2. Less salvage value to be received from existing broken/un-usable counter/partitions, tables/chairs, cupboards, glass, etc.

The contractor should visit the site before quoting the amount and should confirm the items/quantity earmarked by the branch for disposal.

L.S.

L.S.

(-)

(-)








17

Labour only for

  1. Fixing of ceiling light fittings in false ceiling (2’x2’)

  2. Fixing of ceiling light fittings in false ceiling (round)

  3. Fixing of 4’long TL fittings

  4. Fixing of wall/ceiling fans

  5. Fixing of exhaust fan

Note:- Above items will be supplied by the Bank.

Each


Each

Each


Each

Each

8

29

7



11

03








Total





List of approved make:

1. Block Board: Century, Kitply, Green.

2. Ply Board: Century, Kitply, Green.

3. Laminate: Century, Formica/Sunmica.



4. Glass: Modi, Indo Asia.

5. Gyp Board : India Gypsum

6. Foam: Sleepwell, Harmoney.

7. Locks/Handles: Godrej

8. Other materials: ISI mark & approved by the Bank.

Time Required For Completion of Work: 15 days


Date:_________________ Signature of Contractor

with Seal


The database is protected by copyright ©dentisty.org 2016
send message

    Main page